Hi Aleksander,
On Wed, May 31, 2017 at 06:12:41PM +0200, Aleksander Morgado wrote:
> Allow up to one bidirectional FIFO/file based console in addition to
> the default stdin/stdout console that is always registered.
>
> We avoid opening the FIFO files while parsing the options because the
> whole logic may block if e.g. trying to open the --stdout FIFO and
> there is no reader in the other end. So instead, we store the --stdout
> and --stdin file paths given, and we open both sequentially once all
> the options have been parsed. This also allows us to validate that at
> most a single pair of --stdin and --stdout paths has been given.
> e.g.:
> term1 $ mkfifo /tmp/bbstdin
> term1 $ mkfifo /tmp/bbstdout
> term1 $ ./barebox -I /tmp/bbstdin -O /tmp/bbstdout
> (blocks until a reader is available in the stdout FIFO)
>
> term2 $ cat /tmp/bbstdout & cat > /tmp/bbstdin
> (starts reader and writer, which triggers barebox to continue)
>
> If only one console is activated (CONFIG_CONSOLE_ACTIVATE_ALL=n), the
> default stdin/stdout console will be preferred instead of the new
> FIFO/file based, which would need to be activated explicitly later on.
> e.g.:
> barebox@barebox sandbox:/ cs1.active=ioe
>
> Signed-off-by: Aleksander Morgado <aleksan...@aleksander.es>
> ---
> arch/sandbox/os/common.c | 48
> +++++++++++++++++++++++++++++++++++++-----------
> 1 file changed, 37 insertions(+), 11 deletions(-)
The first patch is ok and I applied it. Before this patch though I'd like
to have the attached patch. It merely fixes what we already have: The -I
and -O options got broken over time, we ended up using the barebox
malloc pool before it was initialized.
So next we have to create a patch for what you want to do: Have an
option to create a bidirectional console in barebox. Can we have a
--file-console option that takes two path arguments instead of one, with
some separator in between?
Sascha
------------------------8<-----------------------------
>From 8e5a534df784ab91ffde55ed5038e66e8dbb36c8 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.ha...@pengutronix.de>
Date: Thu, 1 Jun 2017 10:08:31 +0200
Subject: [PATCH] sandbox: Fix registering file/fifo consoles
barebox_register_console() uses xzalloc which requires the malloc pool
to be initialized, so call it during the second option parsing when
this is already done.
Signed-off-by: Sascha Hauer <s.ha...@pengutronix.de>
---
arch/sandbox/os/common.c | 38 +++++++++++++++++++-------------------
1 file changed, 19 insertions(+), 19 deletions(-)
diff --git a/arch/sandbox/os/common.c b/arch/sandbox/os/common.c
index 192917ac22..8cf0873130 100644
--- a/arch/sandbox/os/common.c
+++ b/arch/sandbox/os/common.c
@@ -359,24 +359,6 @@ int main(int argc, char *argv[])
exit(1);
}
break;
- case 'O':
- fd = open(optarg, O_WRONLY);
- if (fd < 0) {
- perror("open");
- exit(1);
- }
-
- barebox_register_console(-1, fd);
- break;
- case 'I':
- fd = open(optarg, O_RDWR);
- if (fd < 0) {
- perror("open");
- exit(1);
- }
-
- barebox_register_console(fd, -1);
- break;
case 'x':
sdl_xres = strtoul(optarg, NULL, 0);
break;
@@ -384,7 +366,7 @@ int main(int argc, char *argv[])
sdl_yres = strtoul(optarg, NULL, 0);
break;
default:
- exit(1);
+ break;
}
}
@@ -421,6 +403,24 @@ int main(int argc, char *argv[])
if (ret)
exit(1);
break;
+ case 'O':
+ fd = open(optarg, O_WRONLY);
+ if (fd < 0) {
+ perror("open");
+ exit(1);
+ }
+
+ barebox_register_console(-1, fd);
+ break;
+ case 'I':
+ fd = open(optarg, O_RDWR);
+ if (fd < 0) {
+ perror("open");
+ exit(1);
+ }
+
+ barebox_register_console(fd, -1);
+ break;
default:
break;
}
--
2.11.0
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
