Change the following:

   - Replace indentation between type and name of local variable from
     tabs to spaces

   - Replace magic number 0x1F with CFI_MFR_ATMEL macro

   - Replace variable 'tmp' with 'ret' and 'i' where appropriate

   - Reformat multi-line comments and add newlines where appropriate

No functional change intended.

This is a backport of kernel commit
41c9c6621afa22c86fe74cf07536fd21c7719ca6

Signed-off-by: Andrey Smirnov <andrew.smir...@gmail.com>
---
 drivers/mtd/devices/mtd_dataflash.c | 31 +++++++++++++++++--------------
 1 file changed, 17 insertions(+), 14 deletions(-)

diff --git a/drivers/mtd/devices/mtd_dataflash.c 
b/drivers/mtd/devices/mtd_dataflash.c
index cdbb194..f47553a 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -83,6 +83,7 @@
 #define OP_WRITE_SECURITY_REVC 0x9A
 #define OP_WRITE_SECURITY      0x9B    /* revision D */
 
+#define CFI_MFR_ATMEL          0x1F
 
 struct dataflash {
        u8                      command[4];
@@ -716,14 +717,15 @@ static struct flash_info dataflash_data [] = {
 
 static struct flash_info * jedec_probe(struct spi_device *spi)
 {
-       int                     tmp;
-       u8                      code = OP_READ_ID;
-       u8                      id[3];
-       u32                     jedec;
-       struct flash_info       *info;
+       int ret, i;
+       u8 code = OP_READ_ID;
+       u8 id[3];
+       u32 jedec;
+       struct flash_info *info;
        int status;
 
-       /* JEDEC also defines an optional "extended device information"
+       /*
+        * JEDEC also defines an optional "extended device information"
         * string for after vendor-specific data, after the three bytes
         * we use here.  Supporting some chips might require using it.
         *
@@ -731,13 +733,14 @@ static struct flash_info * jedec_probe(struct spi_device 
*spi)
         * That's not an error; only rev C and newer chips handle it, and
         * only Atmel sells these chips.
         */
-       tmp = spi_write_then_read(spi, &code, 1, id, 3);
-       if (tmp < 0) {
+       ret = spi_write_then_read(spi, &code, 1, id, 3);
+       if (ret < 0) {
                pr_debug("%s: error %d reading JEDEC ID\n",
-                       dev_name(&spi->dev), tmp);
-               return ERR_PTR(tmp);
+                       dev_name(&spi->dev), ret);
+               return ERR_PTR(ret);
        }
-       if (id[0] != 0x1f)
+
+       if (id[0] != CFI_MFR_ATMEL)
                return NULL;
 
        jedec = id[0];
@@ -746,9 +749,9 @@ static struct flash_info * jedec_probe(struct spi_device 
*spi)
        jedec = jedec << 8;
        jedec |= id[2];
 
-       for (tmp = 0, info = dataflash_data;
-                       tmp < ARRAY_SIZE(dataflash_data);
-                       tmp++, info++) {
+       for (i = 0, info = dataflash_data;
+                       i < ARRAY_SIZE(dataflash_data);
+                       i++, info++) {
                if (info->jedec_id == jedec) {
                        pr_debug("%s: OTP, sector protect%s\n",
                                dev_name(&spi->dev),
-- 
2.9.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Reply via email to