Add a device tree fixup that adds a /chosen/barebox-reset-reason string property to the device tree chosen node. It can be read under Linux in /sys/firmware/devicetree/base/chosen/barebox-reset-reason.
Signed-off-by: Philipp Zabel <p.za...@pengutronix.de> --- Documentation/user/reset-reason.rst | 3 +++ common/reset_source.c | 22 ++++++++++++++++++++++ 2 files changed, 25 insertions(+) diff --git a/Documentation/user/reset-reason.rst b/Documentation/user/reset-reason.rst index 26d37f86dd..26022ba6d7 100644 --- a/Documentation/user/reset-reason.rst +++ b/Documentation/user/reset-reason.rst @@ -45,3 +45,6 @@ The following values can help to detect the reason why the bootloader runs: It depends on your board/SoC and its features if the hardware is able to detect these reset reasons. Most of the time only ``POR`` and ``RST`` are supported but often ``WDG`` as well. + +The reset reason is passed to the kernel via the device tree property string +``/chosen/barebox-reset-reason``. diff --git a/common/reset_source.c b/common/reset_source.c index 06e2ca85f5..e14ba3fc16 100644 --- a/common/reset_source.c +++ b/common/reset_source.c @@ -77,3 +77,25 @@ unsigned int of_get_reset_source_priority(struct device_node *node) return priority; } + +#ifdef CONFIG_OFTREE +static int reset_source_of_fixup(struct device_node *root, void *context) +{ + struct device_node *node; + + node = of_create_node(root, "/chosen"); + if (!node) + return -ENOMEM; + + return of_property_write_string(node, "barebox-reset-reason", + reset_src_names[reset_source]); +} + +static int reset_source_register_of_fixup(void) +{ + of_register_fixup(reset_source_of_fixup, NULL); + + return 0; +} +late_initcall(reset_source_register_of_fixup); +#endif -- 2.16.1 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox