Pick commit 9f587fa29f7e8ed6b8885cff51a51ace3ad85152 from Linux
upstream.
crypto: caam - fix writing to JQCR_MS when using service interface
Most significant part of JQCR (Job Queue Control Register) contains
bits that control endianness: ILE - Immediate Little Endian,
DWS - Double Word Swap.
The bits are automatically set by the Job Queue Controller HW.
Unfortunately these bits are cleared in SW when submitting descriptors
via the register-based service interface.
>From LS1021A:
JQCR_MS = 08080100 - before writing: ILE | DWS | SRC (JR0)
JQCR_MS = 30000100 - after writing: WHL | FOUR | SRC (JR0)
This would cause problems on little endian caam for descriptors
containing immediata data or double-word pointers.
Currently there is no problem since the only descriptors ran through
this interface are the ones that (un)instantiate RNG.
Signed-off-by: Horia Geant? <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Marcin Niestroj <[email protected]>
---
drivers/crypto/caam/ctrl.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/crypto/caam/ctrl.c b/drivers/crypto/caam/ctrl.c
index eafff8ef0..8ce9a859e 100644
--- a/drivers/crypto/caam/ctrl.c
+++ b/drivers/crypto/caam/ctrl.c
@@ -117,7 +117,7 @@ static inline int run_descriptor_deco0(struct device_d
*ctrldev, u32 *desc,
flags |= DECO_JQCR_FOUR;
/* Instruct the DECO to execute it */
- writel(flags, &deco->jr_ctl_hi);
+ setbits32(&deco->jr_ctl_hi, flags);
start = get_time_ns();
while ((deco_dbg_reg = readl(&deco->desc_dbg)) &
--
2.18.0
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
