On Mon, Dec 31, 2018 at 12:12:58PM +0100, Ladislav Michl wrote: > On Wed, Nov 14, 2018 at 09:52:33AM +0100, Sascha Hauer wrote: > > Previous implementation used to add a number to the device names > > for devices registered from the device tree which did not have a 'reg' > > property, thus a device node named "state" resulted in a device name > > "state.<x>". Current implementation skips that number and we get a > > device named "state". This conflicts with our barebox state > > implementation which tries to register a device named "state" itself. > > We could rename the state device nodes of all our device trees, but it > > causes less trouble to rename the devices. > > > > This adds a ".of" suffix to the device names for devices registered from > > the device tree which also has the nice effect that they now can easily > > be recognized. > > Well, that also breaks scripting based on device name (example): > -if [ ${fffa4000.gad...@fffa4000.vbus} != 1 ] > +if [ ${fffa4000.gad...@fffa4000.of.vbus} != 1 ] > then > echo "No USB Device cable plugged, normal boot" > exit 0 > > I can live with that, but would welcome suggestions how to write above > code in some nicer way.
This only becomes a problem when you peristently store an environment and update barebox afterwards. I generally avoid scripting as much as I can. It's good to be able to do scripting, but it's even better to not have to. Scripting is great for hacking and development but IMHO is bad in production. Correct error handling is hard to archieve in scripts, even more so in a restricted shell like hush. Then with scripts it's tempting to store them on the device. When this is done you can run into surprising compatibility issues like above, so you are doomed to maintain compatibility to some ancient scripts that might be on your device. With the example you have given I would rather write the corresponding C code which is much easier to maintain. Sidenote: Your script example only works because your devices base address happens to be in the a-f hexadecimal range. Shell variables cannot start with a number, so 800a4000.gad...@800a4000.vbus would not work. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox