Hi Ahmad,
thanks for answering,
actually I've already done some tests with the 'smc' DEBUG command but I think
and the results I got are not the expected ones.
(I must admit I'm not really an expert upon this PSCI subsystem of the imx7, so
I could be making some trivial errors...)
For example, if I directly execute 'smc -c' or a 'smc -i' just after barebox
booted up I get a crash:
imx7: / smc -c
prefetch abort
pc : [<10fc388c>] lr : [<bfe4a438>]
sp : bffefe10 ip : bffefe20 fp : 00000000
r10: 00000000 r9 : bfe4a55c r8 : bfe5a0f0
r7 : 00000000 r6 : 00000000 r5 : 00000000 r4 : 00000000
r3 : 00000000 r2 : bfe4a55c r1 : 00000001 r0 : 84000003
Flags: nZCv IRQs off FIQs off Mode UK6_32
no stack data available
I think this is OK because the secure monitor is still not installed.
Executing first a 'smc -n' I have:
Hit any key to stop autoboot: 4
imx7: / smc -n
imx7: / smc -i
found psci version 1.0
imx7: /
That's OK, I think.
Now I can try a 'smc -c' to enable the second core:
imx7: / smc -c
imx7: /
at this point I would expect to see the debug line generated by the
'psci_printf("2nd CPU online, now turn off again\n");' present in the funtion
'second_entry(void)'. Instead I just don't see anything.
Is this the expected behavior of 'smc -c' ?
giorgio
> On October 15, 2019 at 1:37 PM Ahmad Fatoum <a.fat...@pengutronix.de> wrote:
>
>
> On 10/15/19 1:29 PM, Giorgio Dal Molin wrote:
> > Hi,
> >
> > can anyone please confirm that a recent barebox version (v2019.10 or
> > v2019.09)
> > is able to boot a linux kernel so that it can enable the second cpu core ?
>
> If you #define DEBUG in arch/arm/cpu/psci.c, a smc command is enabled that can
> be used to test ARM_PSCI_0_2_CPU_ON. This might aid you in your debug effort.
>
> Cheers
> Ahmad
>
> > It actually used to work in the past but now I only get one core running:
> >
> > Loading ARM Linux zImage '/mnt/boot/kernel.img'
> > Loading devicetree from '/mnt/boot/devtree.dtb'
> > commandline: console=ttymxc0,115200n8
> > ip=11.0.0.4::11.0.0.2:255.0.0.0:armgdm:eth0:
> > root=PARTUUID=abd2f9f6-88e5-4657-a5fb-aeb2cc6fde7e rootwait
> > video=HDMI-A-1:1024x768M@60 console=tty1
> > Starting kernel in nonsecure mode
> > [ 0.000000] 000: Booting Linux on physical CPU 0x0
> > [ 0.000000] 000: Linux version 5.2.19-rt11-00268-g0308d71d8410-dirty
> > (giorgio@BVblfs) (gcc version 9.2.1 20190813 (OSELAS.Toolchain 9.2.1)) #1
> > SMP PREEMPT RT Thu Oct 10 07:50:01 CEST 2019
> > [ 0.000000] 000: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7),
> > cr=10c5387d
> > [ 0.000000] 000: CPU: div instructions available: patching division code
> > [ 0.000000] 000: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing
> > instruction cache
> > [ 0.000000] 000: OF: fdt: Machine model: Freescale i.MX7 SabreSD Board
> > [ 0.000000] 000: Memory policy: Data cache writealloc
> > [ 0.000000] 000: cma: Reserved 64 MiB at 0xac000000
> > [ 0.000000] 000: percpu: Embedded 10 pages/cpu s19296 r0 d21664 u40960
> > [ 0.000000] 000: Built 1 zonelists, mobility grouping on. Total pages:
> > 260608
> > [ 0.000000] 000: Kernel command line: console=ttymxc0,115200n8
> > ip=11.0.0.4::11.0.0.2:255.0.0.0:armgdm:eth0:
> > root=PARTUUID=abd2f9f6-88e5-4657-a5fb-aeb2cc6fde7e rootwait
> > video=HDMI-A-1:1024x768M@60 console=tty1
> > [ 0.000000] 000: Dentry cache hash table entries: 131072 (order: 8,
> > 1048576 bytes)
> > [ 0.000000] 000: Inode-cache hash table entries: 65536 (order: 6, 262144
> > bytes)
> > [ 0.000000] 000: Memory: 958252K/1048576K available (9216K kernel code,
> > 403K rwdata, 2308K rodata, 1024K init, 719K bss, 24788K reserved, 65536K
> > cma-reserved, 261700K highmem)
> > [ 0.000000] 000: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2,
> > Nodes=1
> > [ 0.000000] 000: rcu: Preemptible hierarchical RCU implementation.
> > [ 0.000000] 000: rcu: RCU priority boosting: priority 1 delay 500
> > ms.
> > [ 0.000000] 000: rcu: RCU_SOFTIRQ processing moved to rcuc
> > kthreads.
> > [ 0.000000] 000: No expedited grace period (rcu_normal_after_boot).
> > [ 0.000000] 000: Tasks RCU enabled.
> > [ 0.000000] 000: rcu: RCU calculated value of scheduler-enlistment delay
> > is 10 jiffies.
> > [ 0.000000] 000: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
> > [ 0.000000] 000: rcu: Offload RCU callbacks from CPUs: (none).
> > [ 0.000000] 000: arch_timer: cp15 timer(s) running at 8.00MHz (virt).
> > [ 0.000000] 000: clocksource: arch_sys_counter: mask: 0xffffffffffffff
> > max_cycles: 0x1d854df40, max_idle_ns: 440795202120 ns
> > [ 0.000001] 000: sched_clock: 56 bits at 8MHz, resolution 125ns, wraps
> > every 2199023255500ns
> > [ 0.000012] 000: Switching to timer-based delay loop, resolution 125ns
> > [ 0.000433] 000: Switching to timer-based delay loop, resolution 41ns
> > [ 0.000445] 000: sched_clock: 32 bits at 24MHz, resolution 41ns, wraps
> > every 89478484971ns
> > [ 0.000456] 000: clocksource: mxc_timer1: mask: 0xffffffff max_cycles:
> > 0xffffffff, max_idle_ns: 79635851949 ns
> > [ 0.001625] 000: Console: colour dummy device 80x30
> > [ 0.001638] 000: printk: console [tty1] enabled
> > [ 0.001673] 000: Calibrating delay loop (skipped), value calculated
> > using timer frequency.. 48.00 BogoMIPS (lpj=240000)
> > [ 0.001680] 000: pid_max: default: 32768 minimum: 301
> > [ 0.001816] 000: Mount-cache hash table entries: 2048 (order: 1, 8192
> > bytes)
> > [ 0.001833] 000: Mountpoint-cache hash table entries: 2048 (order: 1,
> > 8192 bytes)
> > [ 0.002543] 000: CPU: Testing write buffer coherency: ok
> > [ 0.002896] 000: CPU0: update cpu_capacity 1024
> > [ 0.002908] 000: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
> > [ 0.060000] 000: Setting up static identity map for 0x80100000 -
> > 0x8010003c
> > [ 0.079971] 000: rcu: Hierarchical SRCU implementation.
> > [ 0.160105] 000: smp: Bringing up secondary CPUs ...
> > [ 0.280352] 000: smp: Brought up 1 node, 1 CPU
> > [ 0.280362] 000: SMP: Total of 1 processors activated (48.00 BogoMIPS).
> > [ 0.280370] 000: CPU: All CPU(s) started in SVC mode.
> > [ 0.281280] 000: devtmpfs: initialized
> >
> > giorgio
> >
> > _______________________________________________
> > barebox mailing list
> > barebox@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/barebox
> >
>
>
> --
> Pengutronix e.K. | |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
