On 9/28/20 5:50 PM, Marco Felsch wrote:
> Convert the global number to the more readable IMX_GPIO_NR() macro, no
> functional changes.
> 
> Signed-off-by: Marco Felsch <[email protected]>

Reviewed-by: Ahmad Fatoum <[email protected]>

> ---
>  .../boards/freescale-mx6-sabrelite/board.c    | 20 +++++++++----------
>  1 file changed, 10 insertions(+), 10 deletions(-)
> 
> diff --git a/arch/arm/boards/freescale-mx6-sabrelite/board.c 
> b/arch/arm/boards/freescale-mx6-sabrelite/board.c
> index f4f2994a51..020a44297a 100644
> --- a/arch/arm/boards/freescale-mx6-sabrelite/board.c
> +++ b/arch/arm/boards/freescale-mx6-sabrelite/board.c
> @@ -70,37 +70,37 @@ static int ksz9021rn_phy_fixup(struct phy_device *dev)
>  
>  static struct gpio fec_gpios[] = {
>       {
> -             .gpio = 87,
> +             .gpio = IMX_GPIO_NR(3, 23),
>               .flags = GPIOF_OUT_INIT_LOW,
>               .label = "phy-rst",
>       }, {
> -             .gpio = 190,
> +             .gpio = IMX_GPIO_NR(6, 30),
>               .flags = GPIOF_OUT_INIT_HIGH,
>               .label = "phy-addr2",
>       }, {
> -             .gpio = 23,
> +             .gpio = IMX_GPIO_NR(1, 23),
>               .flags = GPIOF_OUT_INIT_LOW,
>               .label = "phy-led-mode",
>       }, {
>               /* MODE strap-in pins: advertise all capabilities */
> -             .gpio = 185,
> +             .gpio = IMX_GPIO_NR(6, 25),
>               .flags = GPIOF_OUT_INIT_HIGH,
>               .label = "phy-adv1",
>       }, {
> -             .gpio = 187,
> +             .gpio = IMX_GPIO_NR(6, 27),
>               .flags = GPIOF_OUT_INIT_HIGH,
>               .label = "phy-adv1",
>       }, {
> -             .gpio = 188,
> +             .gpio = IMX_GPIO_NR(6, 28),
>               .flags = GPIOF_OUT_INIT_HIGH,
>               .label = "phy-adv1",
>       }, {
> -             .gpio = 189,
> +             .gpio = IMX_GPIO_NR(6, 29),
>               .flags = GPIOF_OUT_INIT_HIGH,
>               .label = "phy-adv1",
>       }, {
>               /* Enable 125 MHz clock output */
> -             .gpio = 184,
> +             .gpio = IMX_GPIO_NR(6, 24),
>               .flags = GPIOF_OUT_INIT_HIGH,
>               .label = "phy-125MHz",
>       },
> @@ -139,9 +139,9 @@ fs_initcall(sabrelite_ksz9021rn_setup);
>  static void sabrelite_ehci_init(void)
>  {
>       /* hub reset */
> -     gpio_direction_output(204, 0);
> +     gpio_direction_output(IMX_GPIO_NR(7, 12), 0);
>       udelay(2000);
> -     gpio_set_value(204, 1);
> +     gpio_set_value(IMX_GPIO_NR(7, 12), 1);
>  }
>  
>  static int sabrelite_devices_init(void)
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox

Reply via email to