Changes since v2:

  * rebase on top of master branch (f873c7ff2497) +
    "RISC-V: extend multi-image to support both S- and M-Mode"
    (http://lists.infradead.org/pipermail/barebox/2021-May/036086.html).
  * "litex serial: add setbrg callback" patch by Marek Czerski is added
    for review;
  * fix "clocksource: timer-riscv: select CSR from device tree" patch;
  * change gpio IP-block base addresses in litex dts;
  * gpio-74xx-mmio uses device_get_match_data() now.

Changes since v1:

  * rebased on top of next branch;
  * new patches are introduced:
    * clocksource: timer-riscv: select CSR from device tree
    * RISC-V: make RISCV_SBI and RISCV_M_MODE explicitly mutually exclusive
    * RISC-V: make it possible to build RV32I multi-image with DEBUG_LL=n
  * almost all of Ahmad's notes are fixed (e.g. unused header files inclusions 
are dropped);
  * NOT FIXED: gpio-74xx-mmio still uses dev_get_drvdata(), not 
device_get_match_data()

Antony Pavlov (9):
  clocksource: timer-riscv: select CSR from device tree
  RISC-V: make it possible to run nmon from PBL C code
  RISC-V: boards: erizo: make it possible to use nmon
  serial: add litex UART driver
  gpio: add driver for 74xx-ICs with MMIO access
  spi: add litex spiflash driver
  net: add LiteEth driver
  RISC-V: add LiteX SoC and linux-on-litex-vexriscv support
  RISC-V: add litex_linux_defconfig

Marek Czerski (1):
  litex serial: add setbrg callback

 arch/riscv/Kconfig.socs                  |  14 +
 arch/riscv/boards/Makefile               |   1 +
 arch/riscv/boards/erizo/lowlevel.c       |   4 +
 arch/riscv/boards/litex-linux/Makefile   |   3 +
 arch/riscv/boards/litex-linux/lowlevel.c |  22 ++
 arch/riscv/boot/Makefile                 |   1 +
 arch/riscv/boot/nmon_entry.S             |  13 +
 arch/riscv/configs/litex_linux_defconfig |  76 +++++
 arch/riscv/dts/Makefile                  |   1 +
 arch/riscv/dts/erizo.dtsi                |   2 +
 arch/riscv/dts/litex-linux.dts           |  92 ++++++
 arch/riscv/dts/litex_soc_linux.dtsi      |  49 +++
 arch/riscv/include/asm/debug_ll.h        |   3 +
 arch/riscv/include/asm/debug_ll_litex.h  | 123 ++++++++
 arch/riscv/include/asm/riscv_nmon.h      |  49 ++-
 common/Kconfig                           |   4 +
 drivers/clocksource/timer-riscv.c        |  24 +-
 drivers/gpio/Kconfig                     |  14 +
 drivers/gpio/Makefile                    |   1 +
 drivers/gpio/gpio-74xx-mmio.c            | 165 ++++++++++
 drivers/net/Kconfig                      |   8 +
 drivers/net/Makefile                     |   1 +
 drivers/net/liteeth.c                    | 376 +++++++++++++++++++++++
 drivers/serial/Makefile                  |   1 +
 drivers/serial/serial_litex.c            | 103 +++++++
 drivers/spi/Kconfig                      |   3 +
 drivers/spi/Makefile                     |   1 +
 drivers/spi/litex_spiflash.c             | 241 +++++++++++++++
 images/Makefile.riscv                    |   4 +
 29 files changed, 1370 insertions(+), 29 deletions(-)
 create mode 100644 arch/riscv/boards/litex-linux/Makefile
 create mode 100644 arch/riscv/boards/litex-linux/lowlevel.c
 create mode 100644 arch/riscv/boot/nmon_entry.S
 create mode 100644 arch/riscv/configs/litex_linux_defconfig
 create mode 100644 arch/riscv/dts/litex-linux.dts
 create mode 100644 arch/riscv/dts/litex_soc_linux.dtsi
 create mode 100644 arch/riscv/include/asm/debug_ll_litex.h
 create mode 100644 drivers/gpio/gpio-74xx-mmio.c
 create mode 100644 drivers/net/liteeth.c
 create mode 100644 drivers/serial/serial_litex.c
 create mode 100644 drivers/spi/litex_spiflash.c

-- 
2.31.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Reply via email to