There are board variants with same board ID but not switch. Detect this variants.
Signed-off-by: Oleksij Rempel <[email protected]> --- arch/arm/boards/skov-imx6/board.c | 149 +++++++++++++++++++++++++----- 1 file changed, 124 insertions(+), 25 deletions(-) diff --git a/arch/arm/boards/skov-imx6/board.c b/arch/arm/boards/skov-imx6/board.c index 030ac62c52..1fa691945e 100644 --- a/arch/arm/boards/skov-imx6/board.c +++ b/arch/arm/boards/skov-imx6/board.c @@ -11,6 +11,7 @@ #include <net.h> #include <of_gpio.h> #include <gpio.h> +#include <linux/micrel_phy.h> #include "version.h" @@ -130,6 +131,9 @@ copy_mac_from_eth0: return eth_of_fixup_node_from_eth_device(root, node_path, ethname); } +#define SKOV_GPIO_MDIO_BUS 0 +#define SKOV_LAN1_PHY_ADDR 1 + #define MAX_V_GPIO 8 struct board_description { @@ -303,20 +307,110 @@ static const struct board_description imx6_variants[] = { }; static int skov_board_no = -1; +static bool skov_have_switch = true; +static const char *no_switch_suffix = "-noswitch"; -static int skov_imx6_fixup(struct device_node *root, void *unused) +static void fixup_machine_compatible(const char *compat, + struct device_node *root) { - int ret; - const char *val; - uint32_t brightness; + int cclen = 0, clen = strlen(compat) + 1; + const char *curcompat; + void *buf; + + if (!root) { + root = of_get_root_node(); + if (!root) + return; + } + + curcompat = of_get_property(root, "compatible", &cclen); + + buf = xzalloc(cclen + clen); + + memcpy(buf, compat, clen); + memcpy(buf + clen, curcompat, cclen); + + /* + * Prepend the compatible from board entry to the machine compatible. + * Used to match bootspec entries against it. + */ + of_set_property(root, "compatible", buf, cclen + clen, true); + + free(buf); +} + +static void fixup_noswitch_machine_compatible(struct device_node *root) +{ + const char *compat = imx6_variants[skov_board_no].dts_compatible; + const char *generic = "skov,imx6"; + size_t size, size_generic; + char *buf; + + size = strlen(compat) + strlen(no_switch_suffix) + 1; + size_generic = strlen(generic) + strlen(no_switch_suffix) + 1; + size = max(size, size_generic); + + /* add generic compatible, so systemd&co can make right decisions */ + buf = xasprintf("%s%s", generic, no_switch_suffix); + fixup_machine_compatible(buf, root); + + /* add specific compatible as fallback, in case this board has new + * challenges. + */ + buf = xasprintf("%s%s", compat, no_switch_suffix); + fixup_machine_compatible(buf, root); + + free(buf); +} + +static void skov_imx6_no_switch(struct device_node *root) +{ + const char *fec_alias = "ethernet0"; struct device_node *node; - struct device_node *chosen = of_create_node(root, "/chosen"); + int ret; + + fixup_noswitch_machine_compatible(root); + node = of_find_node_by_alias(root, fec_alias); + if (node) { + ret = of_device_disable(node); + if (ret) + pr_warn("Can't disable %s\n", fec_alias); + } else { + pr_warn("Can't find node by alias: %s\n", fec_alias); + } + + node = of_find_node_by_alias(root, "mdio-gpio0"); + if (node) { + ret = of_device_disable(node); + if (ret) + pr_warn("Can't disable mdio-gpio0 node\n"); + } else { + pr_warn("Can't find mdio-gpio0 node\n"); + } +} + +static void skov_imx6_switch(struct device_node *root) +{ eth_of_fixup_node_from_eth_device(root, "/mdio-gpio/ksz8873@3/ports/ports@0", "eth0"); eth2_of_fixup_node_individually(root, "/mdio-gpio/ksz8873@3/ports/ports@1", "eth0", "state.ethaddr.eth2", "/state/ethaddr/eth2"); +} + +static int skov_imx6_fixup(struct device_node *root, void *unused) +{ + struct device_node *chosen = of_create_node(root, "/chosen"); + struct device_node *node; + uint32_t brightness; + const char *val; + int ret; + + if (skov_have_switch) + skov_imx6_switch(root); + else + skov_imx6_no_switch(root); switch (bootsource_get()) { case BOOTSOURCE_MMC: @@ -432,34 +526,39 @@ static void skov_init_board(const struct board_description *variant) } } -static void fixup_machine_compatible(const char *compat, - struct device_node *root) +static int skov_switch_test(void) { - const char *curcompat; - int cclen = 0, clen = strlen(compat) + 1; - void *buf; + struct phy_device *phydev; + struct mii_bus *mii; + int ret; - if (!root) { - root = of_get_root_node(); - if (!root) - return; - } + if (skov_board_no < 0) + return 0; - curcompat = of_get_property(root, "compatible", &cclen); + /* On this boards, we have only one MDIO bus. So, it is enough to take + * the first one. + */ + mii = mdiobus_get_bus(SKOV_GPIO_MDIO_BUS); + /* We can't read the switch ID, but we get get ID of the first PHY, + * which is enough to test if the switch is attached. + */ + phydev = get_phy_device(mii, SKOV_LAN1_PHY_ADDR); + if (IS_ERR(phydev)) + goto no_switch; - buf = xzalloc(cclen + clen); + if (phydev->phy_id != PHY_ID_KSZ886X) + goto no_switch; - memcpy(buf, compat, clen); - memcpy(buf + clen, curcompat, cclen); + return 0; - /* - * Prepend the compatible from board entry to the machine compatible. - * Used to match bootspec entries against it. - */ - of_set_property(root, "compatible", buf, cclen + clen, true); +no_switch: + skov_have_switch = false; - free(buf); + pr_notice("No-switch variant is detected\n"); + + return 0; } +late_initcall(skov_switch_test); static int skov_imx6_probe(struct device_d *dev) { -- 2.30.2 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
