Put phy_device_connect() after MAC/DMA reset, otherwise link speed
configuration will be zeroed by the MAC/DMA reset. By an accident zero
configuration equal to the speed 1000, so it was still working for many users.
Signed-off-by: Oleksij Rempel <o.rem...@pengutronix.de>
---
drivers/net/designware_eqos.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/net/designware_eqos.c b/drivers/net/designware_eqos.c
index 6b372e4274..d93cccd634 100644
--- a/drivers/net/designware_eqos.c
+++ b/drivers/net/designware_eqos.c
@@ -390,11 +390,6 @@ static int eqos_start(struct eth_device *edev)
int ret;
int i;
- ret = phy_device_connect(edev, &eqos->miibus, eqos->phy_addr,
- eqos->ops->adjust_link, 0, eqos->interface);
- if (ret)
- return ret;
-
setbits_le32(&eqos->dma_regs->mode, EQOS_DMA_MODE_SWR);
ret = readl_poll_timeout(&eqos->dma_regs->mode, mode_set,
@@ -405,6 +400,11 @@ static int eqos_start(struct eth_device *edev)
return ret;
}
+ ret = phy_device_connect(edev, &eqos->miibus, eqos->phy_addr,
+ eqos->ops->adjust_link, 0, eqos->interface);
+ if (ret)
+ return ret;
+
/* Reset above clears MAC address */
eqos_set_ethaddr(edev, eqos->macaddr);
--
2.30.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
