The generic DT image could be started by boot firmware that doesn't do
all the initialization that we do in arm_cpu_lowlevel_init(), so call it
always for good measure. This enables using the generic image as second
stage to the Raspberry Pi videocore.
Signed-off-by: Ahmad Fatoum <a.fat...@pengutronix.de>
---
arch/arm/cpu/board-dt-2nd.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/cpu/board-dt-2nd.c b/arch/arm/cpu/board-dt-2nd.c
index 0731aecd1a51..6f4a6f26a8c7 100644
--- a/arch/arm/cpu/board-dt-2nd.c
+++ b/arch/arm/cpu/board-dt-2nd.c
@@ -21,6 +21,8 @@ void dt_2nd_aarch64(void *fdt)
/* entry point already set up stack */
+ arm_cpu_lowlevel_init();
+
relocate_to_current_adr();
setup_c();
@@ -50,6 +52,8 @@ ENTRY_FUNCTION(start_dt_2nd, r0, r1, r2)
{
unsigned long image_start = (unsigned long)_text +
global_variable_offset();
+ arm_cpu_lowlevel_init();
+
arm_setup_stack(image_start);
relocate_to_current_adr();
--
2.30.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
