On 28.06.22 22:38, Sam Ravnborg wrote:
> Port the sdramc initialize function from at91bootstrap.
> It is needed from lowlevel code and is a replacement for the
> sdramc init code in at91sam926x_board_init.h
>
> Signed-off-by: Sam Ravnborg <s...@ravnborg.org>
Reviewed-by: Ahmad Fatoum <a.fat...@pengutronix.de>
> +int at91sam9_sdramc_initialize(const struct at91sam9_sdramc_config *config,
> + unsigned int sdram_address)
> +{
> + unsigned int i;
> +
> + /* Step#1 SDRAM feature must be in the configuration register */
> + sdramc_wr(config, AT91_SDRAMC_CR, config->cr);
> +
> + /* Step#2 For mobile SDRAM, temperature-compensated self
> refresh(TCSR),... */
> +
> + /* Step#3 The SDRAM memory type must be set in the Memory Device
> Register */
> + sdramc_wr(config, AT91_SDRAMC_MDR, config->mdr);
> +
> + /* Step#4 The minimum pause of 200 us is provided to precede any single
> toggle */
> + early_udelay(200);
> +
> + /* Step#5 A NOP command is issued to the SDRAM devices */
> + sdramc_wr(config, AT91_SDRAMC_MR, AT91_SDRAMC_MODE_NOP);
> + writel(0x00000000, sdram_address);
> +
> + /* Step#6 An All Banks Precharge command is issued to the SDRAM devices
> */
> + sdramc_wr(config, AT91_SDRAMC_MR, AT91_SDRAMC_MODE_PRECHARGE);
> + writel(0x00000000, sdram_address);
> +
> + /* Pause cycles */
> + early_udelay(2000);
> +
> + /* Step#7 Eight auto-refresh cycles are provided */
> + for (i = 0; i < 8; i++) {
> + sdramc_wr(config, AT91_SDRAMC_MR, AT91_SDRAMC_MODE_REFRESH);
> + writel(0x00000001 + i, sdram_address + 4 + 4 * i);
> + }
> +
> + /* Pause cycles */
> + early_udelay(200);
> +
> + /* Step#8 A Mode Register set (MRS) cycle is issued to program (TCSR,
> PASR, DS) */
> + sdramc_wr(config, AT91_SDRAMC_MR, AT91_SDRAMC_MODE_LMR);
> + writel(0xcafedede, sdram_address + 0x24);
> +
> + /* Pause cycles */
> + early_udelay(200);
> +
> + /* Step#9 For mobile SDRAM initialization, an Extended Mode Register
> set ... */
> +
> + /* Step#10 The application must go into Normal Mode, setting Mode to 0
> + * and perform a write access at any location in the SDRAM.
> + */
> + sdramc_wr(config, AT91_SDRAMC_MR, AT91_SDRAMC_MODE_NORMAL); // Set
> mode
> + writel(0x00000000, sdram_address); //
> Perform mode
> +
> + /* Step#11 Write the refresh rate into the count field in the Refresh
> Register. */
> + sdramc_wr(config, AT91_SDRAMC_TR, config->tr);
> +
> + return 0;
Nitpick: Function can be void if it always reports success.
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
