54bccadddd always populates 'ecc_mode' but forgot to remove the
code which overwrote the previously hardcoded 'NAND_ECC_SOFT'
when needed. This is obsolete now.
Fixes: 54bccadddd ("mtd: atmel_nand: retrieve ecc_mode from pdata")
Signed-off-by: Wolfram Sang <w...@kernel.org>
---
drivers/mtd/nand/atmel/legacy.c | 9 ---------
1 file changed, 9 deletions(-)
diff --git a/drivers/mtd/nand/atmel/legacy.c b/drivers/mtd/nand/atmel/legacy.c
index 184cf465e3..cf402549b8 100644
--- a/drivers/mtd/nand/atmel/legacy.c
+++ b/drivers/mtd/nand/atmel/legacy.c
@@ -1242,21 +1242,12 @@ static int __init atmel_nand_probe(struct device *dev)
nand_chip->ecc.strength = pdata->ecc_strength ? : 1;
nand_chip->ecc.size = 1 << (pdata->ecc_size_shift ? : 9);
- if (pdata->ecc_mode == NAND_ECC_HW) {
- nand_chip->ecc.mode = NAND_ECC_HW;
- }
-
if (pdata->ecc_mode == NAND_ECC_SOFT) {
nand_chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
}
nand_chip->legacy.chip_delay = 40; /* 40us command delay
time */
- if (IS_ENABLED(CONFIG_NAND_ECC_BCH) &&
- pdata->ecc_mode == NAND_ECC_SOFT_BCH) {
- nand_chip->ecc.mode = NAND_ECC_SOFT_BCH;
- }
-
if (host->board->bus_width_16) { /* 16-bit bus width */
nand_chip->options |= NAND_BUSWIDTH_16;
nand_chip->legacy.read_buf = atmel_read_buf16;
--
2.35.1
