The i.MX9 ROM can only load images that fit into OCRAM. The barebox
image is usually bigger. This adds a -pblsize option that has the
effect that it sets the image size in the header to the provided pbl
size, so that the ROM only partially loads the image. barebox will
then use the ROMAPI to load the rest of the image.
We also add an additional alignment of 1KiB to the pblsize. This
helps us with USB booting, as the USB protocol uploads in chunks of
1KiB.
Signed-off-by: Sascha Hauer <s.ha...@pengutronix.de>
---
scripts/imx9image.c | 26 +++++++++++++++++---------
1 file changed, 17 insertions(+), 9 deletions(-)
diff --git a/scripts/imx9image.c b/scripts/imx9image.c
index a991ba5f35..53fb879882 100644
--- a/scripts/imx9image.c
+++ b/scripts/imx9image.c
@@ -346,7 +346,7 @@ static void set_imx_hdr_v3(struct imx_header_v3 *imxhdr,
uint32_t dcd_len,
fhdr_v3->version = IVT_VERSION_B0;
}
-static void set_image_hash(struct boot_img *img, char *filename, uint32_t
hash_type)
+static void set_image_hash(struct boot_img *img, char *filename, uint32_t
hash_type, int size)
{
FILE *fp = NULL;
char sha_command[512];
@@ -383,13 +383,11 @@ static void set_image_hash(struct boot_img *img, char
*filename, uint32_t hash_t
break;
}
- if (img->size == 0 || !filename)
+ if (!size || !filename)
sprintf(sha_command, "%s /dev/null", digest_type);
else
- sprintf(sha_command, "dd status=none if=/dev/zero of=tmp_pad
bs=%d count=1;\
- dd status=none if=\'%s\' of=tmp_pad
conv=notrunc;\
- %s tmp_pad; rm -f tmp_pad",
- img->size, filename, digest_type);
+ sprintf(sha_command, "cat \'%s\' /dev/zero | dd status=none
bs=1 count=%d | %s",
+ filename, size, digest_type);
memset(img->hash, 0, HASH_MAX_LEN);
@@ -562,7 +560,7 @@ static void set_image_array_entry(struct flash_header_v3
*container, soc_type_t
img->offset = offset; /* Is re-adjusted later */
img->size = size;
- set_image_hash(img, tmp_filename, get_hash_algo(images_hash));
+ set_image_hash(img, tmp_filename, get_hash_algo(images_hash), size);
switch (type) {
case SECO:
@@ -678,7 +676,7 @@ static void set_image_array_entry(struct flash_header_v3
*container, soc_type_t
img = &container->img[container->num_images];
img->hab_flags |= IMG_TYPE_DCD_DDR;
img->hab_flags |= CORE_SC << BOOT_IMG_FLAGS_CORE_SHIFT;
- set_image_hash(img, "/dev/null",
IMAGE_HASH_ALGO_DEFAULT);
+ set_image_hash(img, "/dev/null",
IMAGE_HASH_ALGO_DEFAULT, 0);
img->offset = offset + img->size;
img->entry = read_dcd_offset(tmp_filename);
img->dst = img->entry - 1;
@@ -871,6 +869,8 @@ static void copy_file(int ifd, const char *datafile, int
pad, int offset)
(void) close (dfd);
}
+static int pblsize;
+
static int build_container_qx_qm_b0(soc_type_t soc, uint32_t sector_size,
uint32_t ivt_offset,
char *out_file, bool emmc_fastboot, image_t
*image_stack,
bool dcd_skip, uint8_t fuse_version,
uint16_t sw_version,
@@ -920,6 +920,7 @@ static int build_container_qx_qm_b0(soc_type_t soc,
uint32_t sector_size, uint32
img_sp = image_stack;
while (img_sp->option != NO_IMG) { /* stop once we reach null
terminator */
+ int isize;
switch (img_sp->option) {
case FCB:
case AP:
@@ -934,11 +935,14 @@ static int build_container_qx_qm_b0(soc_type_t soc,
uint32_t sector_size, uint32
exit(EXIT_FAILURE);
}
check_file(&sbuf, img_sp->filename);
+ isize = ALIGN(sbuf.st_size, sector_size);
+ if (pblsize && isize > ALIGN(pblsize, 1024))
+ isize = ALIGN(pblsize, 1024);
set_image_array_entry(&imx_header.fhdr[container],
soc,
img_sp,
file_off,
- ALIGN(sbuf.st_size,
sector_size),
+ isize,
img_sp->filename,
dcd_skip,
images_hash);
@@ -1788,6 +1792,7 @@ int main(int argc, char **argv)
{"upower", required_argument, NULL, 'w'},
{"fcb", required_argument, NULL, 'b'},
{"padding", required_argument, NULL, 'G'},
+ {"pblsize", required_argument, NULL, 0x1000},
{NULL, 0, NULL, 0}
};
@@ -2122,6 +2127,9 @@ int main(int argc, char **argv)
printf("Padding length:\t%s bytes\n", optarg);
file_off = atoi(optarg);
break;
+ case 0x1000:
+ pblsize = atoi(optarg);
+ break;
case '?':
default:
/* invalid option */
--
2.39.2
