Instead of having three defines for the same just use the base
definition which is MX8M_ATF_BL33_BASE_ADDR and drop the others.
Signed-off-by: Marco Felsch <m.fel...@pengutronix.de>
---
Documentation/boards/imx/zii-imx8mq-dev/openocd.cfg | 10 +++++-----
arch/arm/boards/phytec-som-imx8mq/lowlevel.c | 2 +-
arch/arm/boards/zii-imx8mq-dev/lowlevel.c | 2 +-
include/mach/imx/atf.h | 2 --
4 files changed, 7 insertions(+), 9 deletions(-)
diff --git a/Documentation/boards/imx/zii-imx8mq-dev/openocd.cfg
b/Documentation/boards/imx/zii-imx8mq-dev/openocd.cfg
index cc0bec6b74b9..fa25348757af 100644
--- a/Documentation/boards/imx/zii-imx8mq-dev/openocd.cfg
+++ b/Documentation/boards/imx/zii-imx8mq-dev/openocd.cfg
@@ -71,15 +71,15 @@ proc ddr_init { } {
proc start_barebox {} {
#
- # We have to place our image at MX8MQ_ATF_BL33_BASE_ADDR in order
+ # We have to place our image at MX8M_ATF_BL33_BASE_ADDR in order
# to be able to initialize ATF firmware since that's where it
# expects entry point to BL33 would be
#
- set MX8MQ_ATF_BL33_BASE_ADDR 0x40200000
+ set MX8M_ATF_BL33_BASE_ADDR 0x40200000
echo "Bootstrap: Loading Barebox"
- load_image images/start_zii_imx8mq_dev.pblb $MX8MQ_ATF_BL33_BASE_ADDR
bin
- echo [format "Bootstrap: Jumping to 0x%08x" $MX8MQ_ATF_BL33_BASE_ADDR]
- resume $MX8MQ_ATF_BL33_BASE_ADDR
+ load_image images/start_zii_imx8mq_dev.pblb $MX8M_ATF_BL33_BASE_ADDR bin
+ echo [format "Bootstrap: Jumping to 0x%08x" $MX8M_ATF_BL33_BASE_ADDR]
+ resume $MX8M_ATF_BL33_BASE_ADDR
}
proc board_init { } {
diff --git a/arch/arm/boards/phytec-som-imx8mq/lowlevel.c
b/arch/arm/boards/phytec-som-imx8mq/lowlevel.c
index 5708c8d75484..362b3ed823c1 100644
--- a/arch/arm/boards/phytec-som-imx8mq/lowlevel.c
+++ b/arch/arm/boards/phytec-som-imx8mq/lowlevel.c
@@ -88,7 +88,7 @@ static __noreturn noinline void
phytec_phycore_imx8mq_start(void)
*
* 4. BL31 blob is uploaded to OCRAM and the control is transfer to it
*
- * 5. BL31 exits EL3 into EL2 at address MX8MQ_ATF_BL33_BASE_ADDR,
+ * 5. BL31 exits EL3 into EL2 at address MX8M_ATF_BL33_BASE_ADDR,
* executing start_phytec_phycore_imx8mq() the third time
*
* 6. Standard barebox boot flow continues
diff --git a/arch/arm/boards/zii-imx8mq-dev/lowlevel.c
b/arch/arm/boards/zii-imx8mq-dev/lowlevel.c
index 42cd05d3f17c..4184748cd858 100644
--- a/arch/arm/boards/zii-imx8mq-dev/lowlevel.c
+++ b/arch/arm/boards/zii-imx8mq-dev/lowlevel.c
@@ -174,7 +174,7 @@ static __noreturn noinline void zii_imx8mq_dev_start(void)
*
* 4. BL31 blob is uploaded to OCRAM and the control is transfer to it
*
- * 5. BL31 exits EL3 into EL2 at address MX8MQ_ATF_BL33_BASE_ADDR,
+ * 5. BL31 exits EL3 into EL2 at address MX8M_ATF_BL33_BASE_ADDR,
* executing start_nxp_imx8mq_evk() the third time
*
* 6. Standard barebox boot flow continues
diff --git a/include/mach/imx/atf.h b/include/mach/imx/atf.h
index fb367d6a7052..15bd13eb27cc 100644
--- a/include/mach/imx/atf.h
+++ b/include/mach/imx/atf.h
@@ -15,8 +15,6 @@
#define MX8MP_ATF_BL31_BASE_ADDR 0x00970000
#define MX8MQ_ATF_BL31_BASE_ADDR 0x00910000
#define MX8M_ATF_BL33_BASE_ADDR 0x40200000
-#define MX8MM_ATF_BL33_BASE_ADDR MX8M_ATF_BL33_BASE_ADDR
-#define MX8MQ_ATF_BL33_BASE_ADDR MX8M_ATF_BL33_BASE_ADDR
#define MX93_ATF_BL31_BASE_ADDR 0x204e0000
#define MX93_ATF_BL33_BASE_ADDR 0x80200000
--
2.39.2
