On 24-01-11, Marco Felsch wrote:
> An size of 4M seems quite large and upstream OP-TEE code mostly uses 2M
> for all i.MX platforms. However keep the 4M as default but make it
> configurable for integrators which want to use the autom. OF fixup
> logic.
>
> Signed-off-by: Marco Felsch <m.fel...@pengutronix.de>
> ---
> arch/arm/mach-imx/imx8m.c | 2 +-
> common/Kconfig | 9 +++++++++
> 2 files changed, 10 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/mach-imx/imx8m.c b/arch/arm/mach-imx/imx8m.c
> index c7c799c64bc4..90dc12ca18cc 100644
> --- a/arch/arm/mach-imx/imx8m.c
> +++ b/arch/arm/mach-imx/imx8m.c
> @@ -68,7 +68,7 @@ static int imx8m_init(const char *cputypestr)
> if (IS_ENABLED(CONFIG_PBL_OPTEE) && tzc380_is_enabled() &&
> !of_find_node_by_path_from(NULL, "/firmware/optee")) {
> static struct of_optee_fixup_data optee_fixup_data = {
> - .shm_size = SZ_4M,
> + .shm_size = CONFIG_OPTEE_SHM_SIZE,
This fails if not defined via Kconfig. I prepare a v2 which uses the
same mechanism as we use for OPTEE_SIZE.
Regards,
Marco
> .method = "smc",
> };
>
> diff --git a/common/Kconfig b/common/Kconfig
> index 1de76651fddf..5b5da6224752 100644
> --- a/common/Kconfig
> +++ b/common/Kconfig
> @@ -1136,6 +1136,15 @@ config OPTEE_SIZE
> Can be smaller than the actual size used by OP-TEE, this is used to
> prevent
> barebox from allocating memory in this area.
>
> +config OPTEE_SHM_SIZE
> + hex
> + default 0x400000
> + prompt "OP-TEE Shared Memory Size"
> + depends on HAVE_OPTEE
> + help
> + Size to reserve in main memory for OP-TEE shared memory communication.
> + Can be used for fixing up the OP-TEE OF node.
> +
> config BOOTM_OPTEE
> bool
> prompt "support booting OP-TEE"
> --
> 2.39.2
>
>
>
