On 12/15/25 3:21 PM, Steffen Trumtrar wrote:
> All other Kconfig symbols use MCI_* instead of MMC_*. Fix that.
> Also, add the cadence-sdhci to the Makefile, so that the driver is build.
>
> Signed-off-by: Steffen Trumtrar <[email protected]>
Reviewed-by: Ahmad Fatoum <[email protected]>
Can we enable this in one of the defconfigs for CI coverage at least?
Cheers,
Ahmad
> ---
> drivers/mci/Kconfig | 2 +-
> drivers/mci/Makefile | 1 +
> 2 files changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mci/Kconfig b/drivers/mci/Kconfig
> index 6736e7421c..e7b8afb3b4 100644
> --- a/drivers/mci/Kconfig
> +++ b/drivers/mci/Kconfig
> @@ -259,7 +259,7 @@ config MCI_STM32_SDMMC2
> If you have a board based on such a SoC and with a SD/MMC slot,
> say Y or M here.
>
> -config MMC_CADENCE_SDHCI
> +config MCI_CADENCE_SDHCI
> tristate "SDHCI support for the Cadence SD/SDIO/eMMC controller"
> select MCI_SDHCI
> help
> diff --git a/drivers/mci/Makefile b/drivers/mci/Makefile
> index f76059e7b5..6a3af532a0 100644
> --- a/drivers/mci/Makefile
> +++ b/drivers/mci/Makefile
> @@ -8,6 +8,7 @@ obj-$(CONFIG_MCI_ATMEL) += atmel_mci.o
> atmel_mci_common.o
> obj-$(CONFIG_MCI_ATMEL_SDHCI) += atmel-sdhci.o atmel-sdhci-common.o
> obj-$(CONFIG_MCI_BCM283X) += mci-bcm2835.o
> obj-$(CONFIG_MCI_BCM283X_SDHOST) += bcm2835-sdhost.o
> +obj-$(CONFIG_MCI_CADENCE_SDHCI) += cadence-sdhci.o
> obj-$(CONFIG_MCI_DOVE) += dove-sdhci.o
> pbl-$(CONFIG_MCI_ATMEL_PBL) += atmel_mci_pbl.o atmel_mci_common.o
> pbl-$(CONFIG_MCI_ATMEL_SDHCI_PBL) += atmel-sdhci-pbl.o
> atmel-sdhci-common.o
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
