Hello, we're having problems with big jobs (1.8 - 6.8TB).
The copy job on main backup storage is about 9h30 but the copy job it's longer than 24h (6.8TB).
It's not a network or disk problem, 10Gbps on network enabled and tested, and 4Gpbs on raid storage with Synology RP2418+ on both sides, primary and secondary SD.
The problem with this big backup jobs is that they only get a maximum of 1Gbps when they are con a copy job.
If we've 4 or 6 jobs at a time the limitation is disk write, mechanical 7.2k rpms.
But when it's only a job, it does not get 2.2 - 2.4 Gbps that parallel jobs get, only 0.5 or max 0.6 Gbps.
So it's not a network or raid disk limit, it sounds more like a speed limit on the job. Both servers have Bareos v24, august 25 updated.
Reading documentation I've found the parameter MaximumBandwidthPerJob on SD or Director but I did not found it on my servers configuration.
There's a default MaximumBandwidthPerJob limitation? If it exists how to override it?
Thanks in advance, Andrés -- You received this message because you are subscribed to the Google Groups "bareos-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/bareos-users/17dc4528-a519-4d09-847a-a7c4460a0ebc%40upc.edu.
