Good to hear. To the best of my knowledge, you are the third person to
compile it, the second person to insmod it, and I am on both of those
lists :) So it may be a little premature to make it too easy for those
that don't know what a kernel module is, or the damage they can cause :)

I use it mainly with the desktop sync, rarely with the modem. You can
still use XmBlackBerry for backups with:

XmBlackBerry -device /dev/bbdesktop0

It seems that the 8700 ppp stack must have been fixed though. What
Blackberry OS Version is on your 8700?

On Fri, 2008-12-19 at 15:09 -0800, kirk w wrote:
>  
> 
> I noticed you had a kernel module in the CVS of Xmblackberry. So I
> thought I'd try it out. Compiled fine against 2.6.27.9, here's dmesg
> after connecting my 8703e:
> 
> 
> 
> usb 3-1: new full speed USB device using uhci_hcd and address 2
> usb 3-1: configuration #1 chosen from 1 choice
> blackberry: probe(2069) - Charge current adjusted
> usbcore: registered new interface driver blackberry
> blackberry: blackberry_init(1912) - passwords are possible
> usb 3-1: USB disconnect, address 2
> usb 3-1: new full speed USB device using uhci_hcd and address 3
> usb 3-1: configuration #1 chosen from 1 choice
> blackberry: blackberry_register_device(1032) -
> xxxxxxxx /dev/bbdesktop0
> blackberry: modem_register_device(747) - xxxxxxxx /dev/bbmodem0
> blackberry: parse_device_info(1394) - xxxxxxxx "RIM 8700 Series Colour
> CDMA Handheld"
> 
> I used wvdial to connect.
> 
> WORKS GREAT!!!!
> 
> I don't use any passwords on my BB, so I didn't test that out. I had
> been using Xmblackberry just for it's support of BB's GPRS modem. But
> this is much better.
> 
> You might want to post a package with just the kernel module on your
> sourceforge site. Maybe submit it for inclusion in the kernel. 
> 
> Thanks,
> 
> Kirk
> 
> 
> 
> 
> 

------------------------------------------------------------------------------
_______________________________________________
Barry-devel mailing list
Barry-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/barry-devel

Reply via email to