Christopher D. Stover wrote:
>> Andy Herkey wrote:
>>> Dave Booth wrote:
>>>> Pulled barry this morning from the fc10 update repos (x86_64) and
>>>> found it installs just fine, recognizes and charges my 8120 and chats
>>>> with it just fine using the distributed barry-tmobileus options file
>>>> and chat script. It makes a connection and starts to negotiate but
>>>> every time gets "LCP terminated by peer" and drops the link. I know it
>>>> isnt a setting on the tmobile end, because I can use (and am using
>>>> now, in fact) the same hardware to connect successfully with vista
>>>> 64bit. Compared configs and recalled that I had to disable all
>>>> compression to make it work on vista, so I added the nodeflate option
>>>> to barry-tmobileus but that didnt fix anything.
>>>>
>>>> Any ideas? Output from setting pppob -v in the options file and
>>>> everything pppd sent to /var/log/messages is pasted below. This output
>>>> was produced with a freshly rebooted handheld to make sure nothing was
>>>> hung up there.
>>>>
>>>> Many thanks,
>>>>
>>>> Dave B
>>>>
>>>> =====================================================
>>>> from /var/log/messages
>>>> =====================================================
>>>> Jan 12 13:51:27 localhost kernel: PPP generic driver version 2.4.2
>>>> Jan 12 13:51:27 localhost pppd[3606]: pppd 2.4.4 started by root, uid 0
>>>> Jan 12 13:51:29 localhost pppd[3606]: Serial connection established.
>>>> Jan 12 13:51:29 localhost pppd[3606]: Using interface ppp0
>>>> Jan 12 13:51:29 localhost pppd[3606]: Connect: ppp0 <--> /dev/pts/2
>>>> Jan 12 13:51:36 localhost pppd[3606]: LCP terminated by peer
>>>> Jan 12 13:51:36 localhost pppd[3606]: Connection terminated.
>>>> Jan 12 13:51:41 localhost pppd[3606]: Exit.
>>>>
>>>> =====================================================
>>>> output from pppob -v
>>>> =====================================================
>>>>
>>>> [r...@localhost ~]# pppd call barry-tmobileus
>>>> usb_set_debug: Setting debugging level to 9 (on)
>>>>
>>>> ReadThread:
>>>> 00000000: 0d 0a 43 4f 4e 4e 45 43 54 0d 0a
>>>> ..CONNECT..
>>>>
>>>> Serial connection established.
>>>> using channel 1
>>>> Using interface ppp0
>>>> Connect: ppp0 <--> /dev/pts/2
>>>> sent [LCP ConfReq id=0x1 <asyncmap 0x0>]
>>>> BulkWrite to endpoint 11:
>>>> 00000000: 7e ff 7d 23 c0 21 7d 21 7d 21 7d 20 7d 2a 7d 22
>>>> ~.}#.!}!}!} }*}"
>>>> 00000010: 7d 26 7d 20 7d 20 7d 20 7d 20 58 7b 7e }&} } } }
>>>> X{~
>>>>
>>>> IPModem special packet:
>>>> 00000000: 00 00 00 00 20 00 00 00 20 00 00 00 00 00 00 00 .... ...
>>>> .......
>>>> 00000010: 18 00 00 00 78 56 34 12 ....xV4.
>>>>
>>>> ReadThread:
>>>> 00000000: 7e ff 7d 23 c0 21 7d 21 7d 20 7d 20 7d 2e 7d 22
>>>> ~.}#.!}!} } }.}"
>>>> 00000010: 7d 26 7d 20 7d 20 7d 20 7d 20 7d 23 7d 24 c0
>>>> 23 }&} } } } }#}$.#
>>>> 00000020: 7d 29 a1 7e }).~
>>>>
>>>> ReadThread:
>>>> 00000000: 7e ff 7d 23 c0 21 7d 22 7d 21 7d 20 7d 2a 7d 22
>>>> ~.}#.!}"}!} }*}"
>>>> 00000010: 7d 26 7d 20 7d 20 7d 20 7d 20 31 7d 2f 7e }&} } } }
>>>> 1}/~
>>>>
>>>> rcvd [LCP ConfReq id=0x0 <asyncmap 0x0> <auth pap>]
>>>> No auth is possible
>>>>
>>>>
>>> Looks like pppd is trying to establish authorization. I am not familiar
>>> with tmobileus but if authorization is not needed try adding noauth to
>>> your barry-tmobileus peers file. Also check the /etc/ppp/options file.
>>> You may have to added there also.
>>>
>>> --Andy
>>>
>> Andy,
>>
>> I see the same thing on my AT&T Bold. We know it worked on Ubuntu
>> because of the patch you just wrote. Something must be wrong in the
>> FC10 packages.
>
> Shannon,
> I'm confused. Was this all working on Ubuntu before Andy wrote that patch
> for you? Did you get the new F10 barry packages yet?
> barry-0.15-0.4.20090109git.fc10
>
> Chris
>
>
> ------------------------------------------------------------------------------
> This SF.net email is sponsored by:
> SourcForge Community
> SourceForge wants to tell your story.
> http://p.sf.net/sfu/sf-spreadtheword
I was just looking for the newer packages in the OpenSUSE build repo and
could not find them. Do you have packages for FC10 already built from
this latest GIT tree?
I tried to build from CVS but was unsuccessful in completing the package
build. I'm sure I'm missing a pre-req somewhere.
------------------------------------------------------------------------------
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword
_______________________________________________
Barry-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/barry-devel
