If you've ever used the task switcher on a BlackBerry application you've seen that it's possible to have programs that run in the background. This means that the module for that application is always in use.
When using the RIM javaloader and attempt to erase the module will fail unless the -f flag is passed to the erase command. When replacing the module that is in use, the RIM javaloader will force a device reset after the module has been loaded. I tried to replace a module on the device that is in use and bjavaloader showed the error: "Device can't install the application. Check that the application isn't already installed !" This is because the packet received after the module is finished loading has the response code 0x78. I can't say for sure but my guess is that this response code actually means that the module is in use and a device reset is required. I have captured the module loading session for the in-use module using RIM javaloader (this time I was able to make UsbSnoop go). You can find the output here: http://www.slashdev.ca/usbcap/ ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Barry-devel mailing list Barry-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/barry-devel
