Short term however:
http://support.microsoft.com/kb/975990
1. Click Start, click Run, type regedit, and then click OK.
2. Locate and then click the following registry key:
HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Services/MSExchangeIS/ParametersPrivate
If the ParametersPrivate registry subkey does not exist, follow these
steps:
1. On the Edit menu, point to New, and then click Key.
2. Type ParametersPrivate, and then press ENTER.
3. On the Edit menu, point to New, and then click DWORD Value.
4. Type Disable All Duplicate Detection, and then press ENTER.
5. On the Edit menu, click Modify.
6. Type 1, and then click OK.
7. Locate and then click the following registry key:
HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Services/MSExchangeIS/ParametersPublic
If the ParametersPublic registry subkey does not exist, follow these
steps:
1. On the Edit menu, point to New, and then click Key.
2. Type ParametersPublic, and then press ENTER.
8.
9. On the Edit menu, point to New, and then click DWORD Value.
10. Type Disable All Duplicate Detection, and then press ENTER.
11. On the Edit menu, click Modify.
12. Type 1, and then click OK.
13. Exit Registry Editor.
It's not really recommended however.
Brent Addis
Systems Integration Specialist
Network Service Providers Ltd.
Unit 32a, 88 Cook St, Auckland 1010
PO Box 90208, Victoria West, Auckland
Email: mailto:[email protected] | Customer Service:
[email protected] | Web: http://www.nsp.co.nz
Tel: +64-9-306-0230 | Support: +64-9-306-0234 | Fax: +64-9-306-0239
Disclaimer:
This message contains confidential information and is intended only for
[email protected]. If you are not [email protected] you should not
disseminate, distribute or copy this e-mail. Please notify
[email protected] immediately by e-mail if you have received this e-mail by
mistake and delete this e-mail from your system. E-mail transmission cannot be
guaranteed to be secure or error-free as information could be intercepted,
corrupted, lost, destroyed, arrive late or incomplete, or contain viruses.
Brent Addis therefore does not accept liability for any errors or omissions in
the contents of this message, which arise as a result of e-mail transmission.
If verification is required please request a hard-copy version.
Network Service Providers is a limited liability company registered in New
Zealand.
-----Original Message-----
From: [email protected] [mailto:[email protected]]
On Behalf Of Ehle, Roland
Sent: Wednesday, 23 February 2011 8:14 p.m.
To: Baruwa users list
Subject: Re: [Baruwa] Some more questions regarding baruwa
Hi Andrew,
not necessary to replace the message id. If you could just remove the original
one, the MTA should do the job and add a new one.
Regards,
Roland
> -----Ursprüngliche Nachricht-----
> Von: [email protected] [mailto:baruwa-
> [email protected]] Im Auftrag von Andrew Colin Kissa
> Gesendet: Dienstag, 22. Februar 2011 16:56
> An: Baruwa users list
> Betreff: Re: [Baruwa] Some more questions regarding baruwa
>
>
> On 22 Feb 2011, at 5:14 PM, Ehle, Roland wrote:
>
> > sorry for being a pain, but I have some more questions:
>
> No problem,
>
> >
> > 1. Quarantine Release
> > There is a problem with released mails, especially with mails, that had
> blocked attachments and if the recipient has his mailbox on a Microsoft
> Exchange Server: When releasing the mail, the original message-id and
> sender are kept. Exchange Servers will not deliver the mail, if a message with
> the same message-id has already been delivered.
>
> I never knew this.
>
> >
> > To prevent this the MailWatch routine for releasing message was to add
> the original message as an attachment to a new message.
> >
> > Is it possible to have this function in Baruwa
>
> No, i will not implement it this way as it is ugly, what i will do is change
> the
> message id by replacing it with a new auto generated id.
>
> >
> > 2. Scanners
> > I found a link "Scanners" under Settings in the web interface. In my case I
> get No scanning nodes found. What does "Scanners" stand for?
>
> That is a stub for the SQL configuration where you will be able to configure
> mailscanner hosts from within Baruwa using the new SQL config module
> introduced in version 4.80.10-1
>
>
> --
> Baruwa - www.baruwa.org
>
> _______________________________________________
> Baruwa mailing list
> [email protected]
> http://lists.baruwa.org/mailman/listinfo/baruwa
_______________________________________________
Baruwa mailing list
[email protected]
http://lists.baruwa.org/mailman/listinfo/baruwa
_______________________________________________
Baruwa mailing list
[email protected]
http://lists.baruwa.org/mailman/listinfo/baruwa
