I think I am missing some information. Strangely this problem/limitation takes place only when there are more then 3 or more dual boards present.
I hope I have the correct problem description. Julien -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: August 3, 2005 1:16 PM To: [EMAIL PROTECTED] Cc: Julien Chavanton; Ambar Roy; mailing_list_bayonne-devel Subject: Re: [Bayonne-devel] Intel Dialogic System Release 6.1 and Bayonne Hum ??? We use Red Hat 7.3 Linux (2.4.18-3) with R 5.1 SP1 with MORE than 512MB our config : # cat /usr/dialogic/cfg/buildinfo Intel Corporation System Software for Linux Intel System Release 5.1 for Linux Intel SP1 Build Date=09/13/2002 Build Number=22 # cat /proc/meminfo total: used: free: shared: buffers: cached: Mem: 1584857088 109162496 1475694592 0 29310976 40333312 Swap: 2089209856 0 2089209856 MemTotal: 1547712 kB MemFree: 1441108 kB MemShared: 0 kB Buffers: 28624 kB Cached: 39388 kB SwapCached: 0 kB Active: 84828 kB Inact_dirty: 140 kB Inact_clean: 1072 kB Inact_target: 17208 kB HighTotal: 654456 kB HighFree: 593828 kB LowTotal: 893256 kB LowFree: 847280 kB SwapTotal: 2040244 kB SwapFree: 2040244 kB Committed_AS: 183504 kB Emmanuel On Wed, Aug 03, 2005 at 10:10:31AM -0500, David Sugar wrote: > Hmm...I had a test server I was experiancing this problem on also, > though it already had more than 512m, so I didn't realize at the time > this was the issue. > > Julien Chavanton wrote: > >Because else Dialogic 5.1 SP1 or SR1 does not start with more then 512MB > >on the server. > > > >I found this while adding memory in an old server and since then I face > >this problem on every servers. > > > >I have to limit memory in lilo or grub. > > > >image=/boot/vmlinuz-2.4.18-5 > > label=linux > > initrd=/boot/initrd-2.4.18-5.img > > read-only > > root=/dev/hda3 > > append="mem=511M" > > > >I can leave with 512MB and springware boards but it would be better if I > >can find the fix and be able use more memory. > > > >Julien > > > > > > > >-----Original Message----- > >From: David Sugar [mailto:[EMAIL PROTECTED] > >Sent: August 2, 2005 11:27 PM > >To: Julien Chavanton > >Cc: [EMAIL PROTECTED]; Ambar Roy; mailing_list_bayonne-devel > >Subject: Re: [Bayonne-devel] Intel Dialogic System Release 6.1 and > >Bayonne > > > >What happened if you had more than 512 meg? I guess 5.1sp2 would also > >work okay also with rhel 2.1/centos 2 since it was rh 7.x based... > > > >Julien Chavanton wrote: > > > >>Something annoying, 6.1 is not supporting spring ware board ;( > >> > >>I think the most updated drivers (this year) is: > >> > >>Intel(r) Dialogic(r) System Release 5.1 Feature Pack 2 for Linux > > > >Service > > > >>Update 45. > >> > >> > > > >http://resource.intel.com/telecom/support/releases/unix51/linux51fp1/On l > > > >>doc/update/relnotes.pdf > >> > >>I hope Intel/Dialogic can give you a free version to encourage > > > >everybody > > > >>to purchase this drivers update. > >> > >>I have problem with memory limitation on previous drivers; I was never > >>able to set more the 512 MB on my Linux server. > >> > >>Julien > >> > >> > >> > >>-----Original Message----- > >>From: > > > >[EMAIL PROTECTED] > > > >[mailto:[EMAIL PROTECTED] r > > > >>g] On Behalf Of David Sugar > >>Sent: August 2, 2005 6:42 AM > >>To: Ambar Roy > >>Cc: 'mailing_list_bayonne-devel' > >>Subject: Re: [Bayonne-devel] Intel Dialogic System Release 6.1 and > >>Bayonne > >> > >>I would like to setup a test system here to get the bayonne2 dialogic > >>drivers back to an operational level sometime this year, but what > >>distros is 6.1 directly supporting? > >> > >>Ambar Roy wrote: > >> > >> > >>>Tony, > >>> > >>>I have no idea on 6.1 release under linux except what I have read on > >> > >>intel > >> > >> > >>>site. My experience on windows has shown that the 6.x series should be > >>>backward compatible with 5.x series. Gc_basic_call_model is a sample > >> > >>gc app > >> > >> > >>>that comes with dialogic system release. > >>> > >>>Regards, > >>> > >>>Ambar Roy > >>> > >>> > >>> > >>> > >>> > >>>>-----Original Message----- > >>>>From: Tony Stocker [mailto:[EMAIL PROTECTED] > >>>>Sent: Monday, August 01, 2005 10:18 PM > >>>>To: mailing_list_bayonne-devel > >>>>Subject: Re: [Bayonne-devel] Intel Dialogic System Release > >>>>6.1 and Bayonne > >>>> > >>>>Ambar, > >>>> > >>>>I was hoping to run Bayonne on a Mandrake 10.x system and it looked > >>> > >>>>from the documentation that the 5.1 materials weren't rated to run on > >>> > >>> > >>>>it, whereas the 6.1 suggests that it at least supports 10.1. > >>>> > >>>>Do you think the 6.1 package might contain all of the elements that > >>>>used to be in the three 5.1 packages? > >>>> > >>>>Is the Gc_basic_call_model a program? If so, where can I find it? > >>>> > >>>>Thanks for the help. > >>>> > >>>>Tony > >>>> > >>>>On 7/26/05, mailing_list_bayonne-devel <[email protected]> wrote: > >>>> > >>>> > >>>> > >>>>>Hi Tony, > >>>>> > >>>>>You can always download and run SR 5.1 and install the SP1. > >>>> > >>>>Although 6.1 > >>>> > >>>> > >>>> > >>>>>should be fully backward compatible with 5.1. > >>>>> > >>>>>First set up 6.1 and run some sample programs. > >>>> > >>>>Gc_basic_call_model is a good > >>>> > >>>> > >>>> > >>>>>one to try. And then try running bayonne. > >>>>> > >>>>>Regards, > >>>>> > >>>>>Ambar Roy > >>>>> > >>>>> > >>>>> > >>>>> > >>>>>>-----Original Message----- > >>>>>>From: Tony Stocker [mailto:[EMAIL PROTECTED] > >>>>>>Sent: Tuesday, July 26, 2005 2:21 AM > >>>>>>To: [email protected] > >>>>>>Subject: [Bayonne-devel] Intel Dialogic System Release > >>>> > >>>>6.1 and Bayonne > >>>> > >>>> > >>>> > >>>>>>Hello All, > >>>>>> > >>>>>>We recently purchased an Intel Dialogic D/41-JCT-LS board and the > >>>>>>System Release 6.1 for Linux with the intention of > >>>> > >>>>installing it for > >>>> > >>>> > >>>> > >>>>>>use with Bayonne. However the documentation at > >>>>>>http://www.gnu.org/software/bayonne/documentation.html > >>>> > >>>>seems to refer > >>>> > >>>> > >>>> > >>>>>>only to version 5.1 and talks about needing three > >>>> > >>>>different packages > >>>> > >>>> > >>>> > >>>>>>(Service Release, Service Pack, Feature Pack) and the CD that we > >>>>>>received from Intel only seems to have one package on it. > >>>>>> > >>>>>>I'm curious to know if anyone has setup Bayonne with a > >>>> > >>>>Dialogic board > >>>> > >>>> > >>>> > >>>>>>and the 6.1 system release. > >>>>>> > >>>>>>Thanks, > >>>>>> > >>>>>>Tony > >>>>>> > >>>>>> > >>>>>>_______________________________________________ > >>>>>>Bayonne-devel mailing list > >>>>>>[email protected] > >>>>>>http://lists.gnu.org/mailman/listinfo/bayonne-devel > >>>>>> > >>>>>> > >>>>> > >>>>> > >>>>_______________________________________________ > >>>>Bayonne-devel mailing list > >>>>[email protected] > >>>>http://lists.gnu.org/mailman/listinfo/bayonne-devel > >>>> > >>>> > >>> > >>> > >>> > >>> > >>>_______________________________________________ > >>>Bayonne-devel mailing list > >>>[email protected] > >>>http://lists.gnu.org/mailman/listinfo/bayonne-devel > _______________________________________________ > Bayonne-devel mailing list > [email protected] > http://lists.gnu.org/mailman/listinfo/bayonne-devel -- _______________________________________________ Bayonne-devel mailing list [email protected] http://lists.gnu.org/mailman/listinfo/bayonne-devel
