Hi everybody
I try to connect to the CiscoAP 1200 on my University with the
bcm43xx-dscpae driver and wpa_supplicant. But it failed. I know that
the wpa_supplicant.conf is correct because its tested by a other study.
I start the sta0 without an address by ./sta_up.sh and start the
wpa_supplicant with the follow command
wpa_supplicat -d dscpae -i sta0 -c /etc/wpa_supplicant.conf -dd >>
wpa_supplicant.log
here is the result of the wpa_supplicant.conf:
Initializing interface 'sta0' conf '/etc/wpa_supplicant.conf' driver
'dscape' ctrl_interface 'N/A'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/
wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
ctrl_interface_group=0
Line: 7 - start of a new network block
ssid - hexdump_ascii(len=13):
57 4c 41 4e 2d 46 48 2d 46 75 6c 64 61 WLAN-FH-Fulda
scan_ssid=1 (0x1)
proto: 0x1
key_mgmt: 0x1
pairwise: 0x18
group: 0x18
eap methods - hexdump(len=2): 19 00
identity - hexdump_ascii(len=8):
66 64 61 69 31 38 38 39 fdai1889
anonymous_identity - hexdump_ascii(len=9):
61 6e 6f 6e 79 6d 6f 75 73 anonymous
password - hexdump_ascii(len=5): [REMOVED]
ca_cert - hexdump_ascii(len=20):
2f 65 74 63 2f 63 65 72 74 2f 72 6f 6f 74 63 61 /etc/cert/rootca
2e 70 65 6d .pem
phase1 - hexdump_ascii(len=20):
69 6e 63 6c 75 64 65 5f 74 6c 73 5f 6c 65 6e 67 include_tls_leng
74 68 3d 31 th=1
phase2 - hexdump_ascii(len=8):
61 75 74 68 3d 47 54 43 auth=GTC
priority=1 (0x1)
Priority group 1
id=0 ssid='WLAN-FH-Fulda'
Initializing interface (2) 'sta0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
SIOCGIWRANGE: WE(compiled)=19 WE(source)=14 enc_capa=0x0
capabilities: key_mgmt 0x0 enc 0x3
Own MAC address: 00:11:24:c6:f1:65
wpa_driver_dscape_set_wpa: enabled=1
wpa_driver_dscape_set_key: alg=none key_idx=0 set_tx=0 seq_len=0
key_len=0
wpa_driver_dscape_set_key: alg=none key_idx=1 set_tx=0 seq_len=0
key_len=0
wpa_driver_dscape_set_key: alg=none key_idx=2 set_tx=0 seq_len=0
key_len=0
wpa_driver_dscape_set_key: alg=none key_idx=3 set_tx=0 seq_len=0
key_len=0
Setting scan request: 0 sec 100000 usec
Added interface sta0
RTM_NEWLINK, IFLA_IFNAME: Interface 'sta0' added
RTM_NEWLINK, IFLA_IFNAME: Interface 'sta0' added
State: DISCONNECTED -> SCANNING
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=13):
57 4c 41 4e 2d 46 48 2d 46 75 6c 64 61 WLAN-FH-Fulda
RX ctrl_iface - hexdump_ascii(len=6):
41 54 54 41 43 48 ATTACH
CTRL_IFACE monitor attached - hexdump(len=24): 2f 74 6d 70 2f 77 70
61 5f 63 74 72 6c 5f 34 38 35 34 2d 37 37 00 10 05
Wireless event: cmd=0x8b19 len=8
Received 820 bytes of scan results (5 BSSes)
Scan results: 5
Selecting BSS from priority group 1
0: 00:0f:f7:7a:ac:70 ssid='WLAN-FH-Fulda' wpa_ie_len=26 rsn_ie_len=0
caps=0x11
selected based on WPA IE
Trying to associate with 00:0f:f7:7a:ac:70 (SSID='WLAN-FH-Fulda'
freq=2412 MHz)
CTRL_IFACE monitor send - hexdump(len=24): 2f 74 6d 70 2f 77 70 61 5f
63 74 72 6c 5f 34 38 35 34 2d 37 37 00 10 05
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 1
WPA: set AP WPA IE - hexdump(len=26): dd 18 00 50 f2 01 01 00 00 50
f2 02 01 00 00 50 f2 02 01 00 00 50 f2 01 28 00
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT 802.1X
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01
00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 01
No keys have been configured - skip key clearing
State: SCANNING -> ASSOCIATING
wpa_driver_hostap_associate
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - portControl=Auto
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=6):
53 54 41 54 55 53 STATUS
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
Authentication with 00:00:00:00:00:00 timed out.
CTRL_IFACE monitor send - hexdump(len=24): 2f 74 6d 70 2f 77 70 61 5f
63 74 72 6c 5f 34 38 35 34 2d 37 37 00 10 05
Added BSSID 00:00:00:00:00:00 into blacklist
State: ASSOCIATING -> DISCONNECTED
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
Wireless event: cmd=0x8b19 len=8
Received 933 bytes of scan results (6 BSSes)
Scan results: 6
Selecting BSS from priority group 1
0: 00:0f:f7:7a:ac:70 ssid='WLAN-FH-Fulda' wpa_ie_len=26 rsn_ie_len=0
caps=0x11
selected based on WPA IE
Trying to associate with 00:0f:f7:7a:ac:70 (SSID='WLAN-FH-Fulda'
freq=2412 MHz)
CTRL_IFACE monitor send - hexdump(len=24): 2f 74 6d 70 2f 77 70 61 5f
63 74 72 6c 5f 34 38 35 34 2d 37 37 00 10 05
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 1
WPA: set AP WPA IE - hexdump(len=26): dd 18 00 50 f2 01 01 00 00 50
f2 02 01 00 00 50 f2 02 01 00 00 50 f2 01 28 00
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT 802.1X
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01
00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 01
No keys have been configured - skip key clearing
State: SCANNING -> ASSOCIATING
wpa_driver_hostap_associate
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - portControl=Auto
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
Authentication with 00:00:00:00:00:00 timed out.
CTRL_IFACE monitor send - hexdump(len=24): 2f 74 6d 70 2f 77 70 61 5f
63 74 72 6c 5f 34 38 35 34 2d 37 37 00 10 05
BSSID 00:00:00:00:00:00 blacklist count incremented to 2
State: ASSOCIATING -> DISCONNECTED
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=13):
57 4c 41 4e 2d 46 48 2d 46 75 6c 64 61 WLAN-FH-Fulda
Wireless event: cmd=0x8b19 len=8
Received 656 bytes of scan results (4 BSSes)
Scan results: 4
Selecting BSS from priority group 1
0: 00:0f:f7:7a:ac:70 ssid='WLAN-FH-Fulda' wpa_ie_len=26 rsn_ie_len=0
caps=0x11
selected based on WPA IE
Trying to associate with 00:0f:f7:7a:ac:70 (SSID='WLAN-FH-Fulda'
freq=2412 MHz)
CTRL_IFACE monitor send - hexdump(len=24): 2f 74 6d 70 2f 77 70 61 5f
63 74 72 6c 5f 34 38 35 34 2d 37 37 00 10 05
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 1
WPA: set AP WPA IE - hexdump(len=26): dd 18 00 50 f2 01 01 00 00 50
f2 02 01 00 00 50 f2 02 01 00 00 50 f2 01 28 00
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT 802.1X
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01
00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 01
No keys have been configured - skip key clearing
State: SCANNING -> ASSOCIATING
wpa_driver_hostap_associate
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - portControl=Auto
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
CTRL-EVENT-TERMINATING - signal 2 received
CTRL_IFACE monitor send - hexdump(len=24): 2f 74 6d 70 2f 77 70 61 5f
63 74 72 6c 5f 34 38 35 34 2d 37 37 00 10 05
Removing interface sta0
State: ASSOCIATING -> DISCONNECTED
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_dscape_set_wpa: enabled=0
No keys have been configured - skip key clearing
CTRL_IFACE wait for attached monitors to receive messages
Removed BSSID 00:00:00:00:00:00 from blacklist (clear)
Cancelling scan request
Initializing interface 'sta0' conf '/etc/wpa_supplicant.conf' driver
'dscape' ctrl_interface 'N/A'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/
wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
ctrl_interface_group=0
Line: 7 - start of a new network block
ssid - hexdump_ascii(len=13):
57 4c 41 4e 2d 46 48 2d 46 75 6c 64 61 WLAN-FH-Fulda
proto: 0x1
key_mgmt: 0x1
pairwise: 0x18
group: 0x18
eap methods - hexdump(len=2): 19 00
identity - hexdump_ascii(len=8):
66 64 61 69 31 38 38 39 fdai1889
anonymous_identity - hexdump_ascii(len=9):
61 6e 6f 6e 79 6d 6f 75 73 anonymous
password - hexdump_ascii(len=5): [REMOVED]
ca_cert - hexdump_ascii(len=20):
2f 65 74 63 2f 63 65 72 74 2f 72 6f 6f 74 63 61 /etc/cert/rootca
2e 70 65 6d .pem
phase1 - hexdump_ascii(len=20):
69 6e 63 6c 75 64 65 5f 74 6c 73 5f 6c 65 6e 67 include_tls_leng
74 68 3d 31 th=1
phase2 - hexdump_ascii(len=8):
61 75 74 68 3d 47 54 43 auth=GTC
priority=1 (0x1)
Priority group 1
id=0 ssid='WLAN-FH-Fulda'
Initializing interface (2) 'sta0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
SIOCGIWRANGE: WE(compiled)=19 WE(source)=14 enc_capa=0x0
capabilities: key_mgmt 0x0 enc 0x3
Own MAC address: 00:11:24:c6:f1:65
wpa_driver_dscape_set_wpa: enabled=1
wpa_driver_dscape_set_key: alg=none key_idx=0 set_tx=0 seq_len=0
key_len=0
wpa_driver_dscape_set_key: alg=none key_idx=1 set_tx=0 seq_len=0
key_len=0
wpa_driver_dscape_set_key: alg=none key_idx=2 set_tx=0 seq_len=0
key_len=0
wpa_driver_dscape_set_key: alg=none key_idx=3 set_tx=0 seq_len=0
key_len=0
Setting scan request: 0 sec 100000 usec
Added interface sta0
RTM_NEWLINK, IFLA_IFNAME: Interface 'sta0' added
RTM_NEWLINK, IFLA_IFNAME: Interface 'sta0' added
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
RX ctrl_iface - hexdump_ascii(len=6):
41 54 54 41 43 48 ATTACH
CTRL_IFACE monitor attached - hexdump(len=25): 2f 74 6d 70 2f 77 70
61 5f 63 74 72 6c 5f 34 38 35 34 2d 31 31 38 00 04 ca
Wireless event: cmd=0x8b19 len=8
Received 605 bytes of scan results (4 BSSes)
Scan results: 4
Selecting BSS from priority group 1
0: 00:0f:f7:7a:ac:70 ssid='WLAN-FH-Fulda' wpa_ie_len=26 rsn_ie_len=0
caps=0x11
selected based on WPA IE
Trying to associate with 00:0f:f7:7a:ac:70 (SSID='WLAN-FH-Fulda'
freq=2412 MHz)
CTRL_IFACE monitor send - hexdump(len=25): 2f 74 6d 70 2f 77 70 61 5f
63 74 72 6c 5f 34 38 35 34 2d 31 31 38 00 04 ca
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 1
WPA: set AP WPA IE - hexdump(len=26): dd 18 00 50 f2 01 01 00 00 50
f2 02 01 00 00 50 f2 02 01 00 00 50 f2 01 28 00
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT 802.1X
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01
00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 01
No keys have been configured - skip key clearing
State: SCANNING -> ASSOCIATING
wpa_driver_hostap_associate
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - portControl=Auto
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
Authentication with 00:00:00:00:00:00 timed out.
CTRL_IFACE monitor send - hexdump(len=25): 2f 74 6d 70 2f 77 70 61 5f
63 74 72 6c 5f 34 38 35 34 2d 31 31 38 00 04 ca
Added BSSID 00:00:00:00:00:00 into blacklist
State: ASSOCIATING -> DISCONNECTED
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Wireless event: cmd=0x8b19 len=8
Received 656 bytes of scan results (4 BSSes)
Scan results: 4
Selecting BSS from priority group 1
0: 00:0f:f7:7a:ac:70 ssid='WLAN-FH-Fulda' wpa_ie_len=26 rsn_ie_len=0
caps=0x11
selected based on WPA IE
Trying to associate with 00:0f:f7:7a:ac:70 (SSID='WLAN-FH-Fulda'
freq=2412 MHz)
CTRL_IFACE monitor send - hexdump(len=25): 2f 74 6d 70 2f 77 70 61 5f
63 74 72 6c 5f 34 38 35 34 2d 31 31 38 00 04 ca
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 1
WPA: set AP WPA IE - hexdump(len=26): dd 18 00 50 f2 01 01 00 00 50
f2 02 01 00 00 50 f2 02 01 00 00 50 f2 01 28 00
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT 802.1X
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01
00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 01
No keys have been configured - skip key clearing
State: SCANNING -> ASSOCIATING
wpa_driver_hostap_associate
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - portControl=Auto
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
Authentication with 00:00:00:00:00:00 timed out.
CTRL_IFACE monitor send - hexdump(len=25): 2f 74 6d 70 2f 77 70 61 5f
63 74 72 6c 5f 34 38 35 34 2d 31 31 38 00 04 ca
BSSID 00:00:00:00:00:00 blacklist count incremented to 2
State: ASSOCIATING -> DISCONNECTED
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
Wireless event: cmd=0x8b19 len=8
Received 492 bytes of scan results (3 BSSes)
Scan results: 3
Selecting BSS from priority group 1
0: 00:0f:f7:7a:ac:70 ssid='WLAN-FH-Fulda' wpa_ie_len=26 rsn_ie_len=0
caps=0x11
selected based on WPA IE
Trying to associate with 00:0f:f7:7a:ac:70 (SSID='WLAN-FH-Fulda'
freq=2412 MHz)
CTRL_IFACE monitor send - hexdump(len=25): 2f 74 6d 70 2f 77 70 61 5f
63 74 72 6c 5f 34 38 35 34 2d 31 31 38 00 04 ca
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 1
WPA: set AP WPA IE - hexdump(len=26): dd 18 00 50 f2 01 01 00 00 50
f2 02 01 00 00 50 f2 02 01 00 00 50 f2 01 28 00
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT 802.1X
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01
00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 01
No keys have been configured - skip key clearing
State: SCANNING -> ASSOCIATING
wpa_driver_hostap_associate
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - portControl=Auto
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
Authentication with 00:00:00:00:00:00 timed out.
CTRL_IFACE monitor send - hexdump(len=25): 2f 74 6d 70 2f 77 70 61 5f
63 74 72 6c 5f 34 38 35 34 2d 31 31 38 00 04 ca
BSSID 00:00:00:00:00:00 blacklist count incremented to 3
State: ASSOCIATING -> DISCONNECTED
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
Wireless event: cmd=0x8b19 len=8
Received 605 bytes of scan results (4 BSSes)
Scan results: 4
Selecting BSS from priority group 1
0: 00:0f:f7:7a:ac:70 ssid='WLAN-FH-Fulda' wpa_ie_len=26 rsn_ie_len=0
caps=0x11
selected based on WPA IE
Trying to associate with 00:0f:f7:7a:ac:70 (SSID='WLAN-FH-Fulda'
freq=2412 MHz)
CTRL_IFACE monitor send - hexdump(len=25): 2f 74 6d 70 2f 77 70 61 5f
63 74 72 6c 5f 34 38 35 34 2d 31 31 38 00 04 ca
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 1
WPA: set AP WPA IE - hexdump(len=26): dd 18 00 50 f2 01 01 00 00 50
f2 02 01 00 00 50 f2 02 01 00 00 50 f2 01 28 00
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT 802.1X
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01
00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 01
No keys have been configured - skip key clearing
State: SCANNING -> ASSOCIATING
wpa_driver_hostap_associate
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - portControl=Auto
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
Authentication with 00:00:00:00:00:00 timed out.
CTRL_IFACE monitor send - hexdump(len=25): 2f 74 6d 70 2f 77 70 61 5f
63 74 72 6c 5f 34 38 35 34 2d 31 31 38 00 04 ca
BSSID 00:00:00:00:00:00 blacklist count incremented to 4
State: ASSOCIATING -> DISCONNECTED
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
Wireless event: cmd=0x8b19 len=8
Received 492 bytes of scan results (3 BSSes)
Scan results: 3
Selecting BSS from priority group 1
0: 00:0f:f7:7a:ac:70 ssid='WLAN-FH-Fulda' wpa_ie_len=26 rsn_ie_len=0
caps=0x11
selected based on WPA IE
Trying to associate with 00:0f:f7:7a:ac:70 (SSID='WLAN-FH-Fulda'
freq=2412 MHz)
CTRL_IFACE monitor send - hexdump(len=25): 2f 74 6d 70 2f 77 70 61 5f
63 74 72 6c 5f 34 38 35 34 2d 31 31 38 00 04 ca
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 1
WPA: set AP WPA IE - hexdump(len=26): dd 18 00 50 f2 01 01 00 00 50
f2 02 01 00 00 50 f2 02 01 00 00 50 f2 01 28 00
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT 802.1X
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01
00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 01
No keys have been configured - skip key clearing
State: SCANNING -> ASSOCIATING
wpa_driver_hostap_associate
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - portControl=Auto
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
Authentication with 00:00:00:00:00:00 timed out.
CTRL_IFACE monitor send - hexdump(len=25): 2f 74 6d 70 2f 77 70 61 5f
63 74 72 6c 5f 34 38 35 34 2d 31 31 38 00 04 ca
BSSID 00:00:00:00:00:00 blacklist count incremented to 5
State: ASSOCIATING -> DISCONNECTED
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
Wireless event: cmd=0x8b19 len=8
Received 592 bytes of scan results (4 BSSes)
Scan results: 4
Selecting BSS from priority group 1
0: 00:11:5c:77:7b:30 ssid='WLAN-FH-Fulda' wpa_ie_len=26 rsn_ie_len=0
caps=0x11
skip WPA IE - GTK cipher mismatch
1: 00:11:5c:37:52:60 ssid='WLAN-FH-Fulda' wpa_ie_len=26 rsn_ie_len=0
caps=0x11
skip WPA IE - GTK cipher mismatch
2: 00:0f:f7:7f:e5:a0 ssid='WLAN-FH-Fulda' wpa_ie_len=26 rsn_ie_len=0
caps=0x11
selected based on WPA IE
Trying to associate with 00:0f:f7:7f:e5:a0 (SSID='WLAN-FH-Fulda'
freq=2412 MHz)
CTRL_IFACE monitor send - hexdump(len=25): 2f 74 6d 70 2f 77 70 61 5f
63 74 72 6c 5f 34 38 35 34 2d 31 31 38 00 04 ca
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 1
WPA: set AP WPA IE - hexdump(len=26): dd 18 00 50 f2 01 01 00 00 50
f2 02 01 00 00 50 f2 02 01 00 00 50 f2 01 28 00
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT 802.1X
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01
00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 01
No keys have been configured - skip key clearing
State: SCANNING -> ASSOCIATING
wpa_driver_hostap_associate
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - portControl=Auto
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
Authentication with 00:00:00:00:00:00 timed out.
CTRL_IFACE monitor send - hexdump(len=25): 2f 74 6d 70 2f 77 70 61 5f
63 74 72 6c 5f 34 38 35 34 2d 31 31 38 00 04 ca
BSSID 00:00:00:00:00:00 blacklist count incremented to 6
State: ASSOCIATING -> DISCONNECTED
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
Wireless event: cmd=0x8b19 len=8
Received 820 bytes of scan results (5 BSSes)
Scan results: 5
Selecting BSS from priority group 1
0: 00:0f:f7:7a:ac:70 ssid='WLAN-FH-Fulda' wpa_ie_len=26 rsn_ie_len=0
caps=0x11
selected based on WPA IE
Trying to associate with 00:0f:f7:7a:ac:70 (SSID='WLAN-FH-Fulda'
freq=2412 MHz)
CTRL_IFACE monitor send - hexdump(len=25): 2f 74 6d 70 2f 77 70 61 5f
63 74 72 6c 5f 34 38 35 34 2d 31 31 38 00 04 ca
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 1
WPA: set AP WPA IE - hexdump(len=26): dd 18 00 50 f2 01 01 00 00 50
f2 02 01 00 00 50 f2 02 01 00 00 50 f2 01 28 00
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT 802.1X
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01
00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 01
No keys have been configured - skip key clearing
State: SCANNING -> ASSOCIATING
wpa_driver_hostap_associate
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - portControl=Auto
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
CTRL-EVENT-TERMINATING - signal 2 received
CTRL_IFACE monitor send - hexdump(len=25): 2f 74 6d 70 2f 77 70 61 5f
63 74 72 6c 5f 34 38 35 34 2d 31 31 38 00 04 ca
Removing interface sta0
State: ASSOCIATING -> DISCONNECTED
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_dscape_set_wpa: enabled=0
No keys have been configured - skip key clearing
CTRL_IFACE wait for attached monitors to receive messages
Removed BSSID 00:00:00:00:00:00 from blacklist (clear)
Cancelling scan request
_____________________________________________
If anyone give me some tips how to solve the problem... you would do
so many studys happy ;-)
Thank yor for reading this message
cu
Konrad Merz
_______________________________________________
Bcm43xx-dev mailing list
Bcm43xx-dev@lists.berlios.de
http://lists.berlios.de/mailman/listinfo/bcm43xx-dev
