On Monday 02 October 2006 18:47, Hendrik Sattler wrote: > Am Montag 02 Oktober 2006 10:43 schrieb Michael Buesch: > > On Sunday 01 October 2006 14:11, Hendrik Sattler wrote: > > > Am Dienstag 26 September 2006 16:46 schrieb Larry Finger: > > > > To fix as much as we can at the moment, please get the > > > > "patch_2.6.18_to_wireless-2.6.bz2" file from > > > > ftp://lwfinger.dynalias.org/patches and apply that to your kernel. > > > > > > Anything else that could be applied? I built 2.6.18 with wireless2.6 > > > patch yesterday and tonight, I got: > > > NETDEV WATCHDOG: wlan0: transmit timed out > > > bcm43xx: Controller RESET (TX timeout) ... > > > bcm43xx: Controller restarted > > > > > > I have a BCM4306. > > > > Complete logs, please. > > bcm43xx: set security called, .enabled = 1, .encrypt = 1 > NETDEV WATCHDOG: wlan0: transmit timed out > bcm43xx: Controller RESET (TX timeout) ... > bcm43xx: select_wireless_core: cleanup > bcm43xx: Radio turned off > bcm43xx: DMA-32 0x0200 (RX) max used slots: 2/64 > bcm43xx: DMA-32 0x02A0 (TX) max used slots: 0/512 > bcm43xx: DMA-32 0x0280 (TX) max used slots: 0/512 > bcm43xx: DMA-32 0x0260 (TX) max used slots: 0/512 > bcm43xx: DMA-32 0x0240 (TX) max used slots: 0/512 > bcm43xx: DMA-32 0x0220 (TX) max used slots: 4/512 > bcm43xx: DMA-32 0x0200 (TX) max used slots: 0/512 > bcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18 02:36:27) > bcm43xx: Radio turned on > bcm43xx: Chip initialized > bcm43xx: 32-bit DMA initialized > bcm43xx: Keys cleared > bcm43xx: Selected 802.11 core (phytype 2) > bcm43xx: Controller restarted > > Or do you also need softmac debug output? (turned off currently)
Yeah, please provide _full_ dmesg including softmac messages. > If the problem is difficult to solve: Since the AP association gets lost, may > it be possible to remove the network device and bring it back during such a > restart? This would make an automatic reconnect possible (e.g. using > network-manager). The restart should not happen in the first place. But there used to be a re-association workaround in the driver. I'm not sure why it does not work. Maybe softmac debugging messages will tell us. -- Greetings Michael. _______________________________________________ Bcm43xx-dev mailing list [email protected] https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
