Le mardi 17 octobre 2006 à 23:11 -0500, Larry Finger a écrit : > There are two new patch files on my FTP server > (ftp://lwfinger.dynalias.org/patches). The first of > these will make the signal, noise and quality outputs of 2.6.18.1 match those > of wireless-2.6. > > The second patch file implements the new PHY initialization and RSSI > processing algorithms recently > posted by Joe Jezak of the clean-room team. I am particularly interested in > learning whether these > changes help the signal strength for 4318 chips. >
Hello, I've a 4318 chip from Linksys (WMP54GS) :
lspci :
01:09.0 Network controller: Broadcom Corporation BCM4318 [AirForce One
54g] 802.11g Wireless LAN Controller (rev 02)
I use the 2.6.18.1 kernel and the connexion work beetween my linksys
rooter only with a rate of 11Mb/s. All with a WPA+PSK encryption
initiated by wpa_supplicant.
iwconfig eth1 :
eth1 IEEE 802.11b/g ESSID:"xxxxxxxx" Nickname:"Broadcom 4318"
Mode:Managed Frequency=2.437 GHz Access Point:
00:14:BF:64:BD:38
Bit Rate=11 Mb/s Tx-Power=19 dBm
RTS thr:off Fragment thr:off
Link Quality=51/100 Signal level=-59 dBm Noise level=-68 dBm
Rx invalid nwid:0 Rx invalid crypt:35 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
I have tryed your patches and the patch_2.6.18.1_fix_phy_init simply
dont work for me. The first one proposed seems to be ok and the quality
informations are similar to the one under windows.
So I copy some part of kernel log to each patch try :
2.6.18.1 + signal_quality :
Oct 18 16:10:27 neutrino kernel: ACPI: PCI Interrupt 0000:01:09.0[A] ->
Link [APC4] -> GSI 19 (level, low) -> IRQ 74
Oct 18 16:10:27 neutrino kernel: bcm43xx: Chip ID 0x4318, rev 0x2
Oct 18 16:10:27 neutrino kernel: bcm43xx: Number of cores: 4
Oct 18 16:10:27 neutrino kernel: bcm43xx: Core 0: ID 0x800, rev 0xd,
vendor 0x4243, enabled
Oct 18 16:10:27 neutrino kernel: bcm43xx: Core 1: ID 0x812, rev 0x9,
vendor 0x4243, enabled
Oct 18 16:10:27 neutrino kernel: bcm43xx: Core 2: ID 0x804, rev 0xc,
vendor 0x4243, enabled
Oct 18 16:10:27 neutrino kernel: bcm43xx: Core 3: ID 0x80d, rev 0x7,
vendor 0x4243, enabled
Oct 18 16:10:27 neutrino kernel: bcm43xx: PHY connected
Oct 18 16:10:27 neutrino kernel: bcm43xx: Detected PHY: Version: 3, Type
2, Revision 7
Oct 18 16:10:27 neutrino kernel: bcm43xx: Detected Radio: ID: 8205017f
(Manuf: 17f Ver: 2050 Rev: 8)
Oct 18 16:10:27 neutrino kernel: bcm43xx: Radio turned off
Oct 18 16:10:27 neutrino kernel: bcm43xx: Radio turned off
Oct 18 16:10:29 neutrino kernel: bcm43xx: PHY connected
Oct 18 16:10:29 neutrino kernel: bcm43xx: Microcode rev 0x127, pl 0xe
(2005-04-18 02:36:27)
Oct 18 16:10:29 neutrino kernel: bcm43xx: Radio turned on
Oct 18 16:10:29 neutrino kernel: bcm43xx: ASSERTION FAILED
(radio_attenuation < 10) at:
drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1496:bcm43xx_find_lopair()
Oct 18 16:10:29 neutrino kernel: bcm43xx: ASSERTION FAILED
(radio_attenuation < 10) at:
drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1496:bcm43xx_find_lopair()
Oct 18 16:10:29 neutrino kernel: bcm43xx: ASSERTION FAILED
(radio_attenuation < 10) at:
drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1496:bcm43xx_find_lopair()
Oct 18 16:10:29 neutrino kernel: bcm43xx: Chip initialized
Oct 18 16:10:29 neutrino kernel: bcm43xx: 32-bit DMA initialized
Oct 18 16:10:29 neutrino kernel: bcm43xx: Keys cleared
Oct 18 16:10:29 neutrino kernel: bcm43xx: Selected 802.11 core (phytype
2)
Oct 18 16:10:29 neutrino kernel: bcm43xx: ASSERTION FAILED
(radio_attenuation < 10) at:
drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1496:bcm43xx_find_lopair()
Oct 18 16:10:29 neutrino kernel: SoftMAC: Associate: Scanning for
networks first.
Oct 18 16:10:29 neutrino kernel: SoftMAC: Associate: failed to initiate
scan. Is device up?
Oct 18 16:10:29 neutrino kernel: ADDRCONF(NETDEV_UP): eth1: link is not
ready
Oct 18 16:10:29 neutrino kernel: SoftMAC: empty ratesinfo?
Oct 18 16:10:29 neutrino kernel: SoftMAC: empty ratesinfo?
Oct 18 16:10:29 neutrino kernel: SoftMAC: Associate: Scanning for
networks first.
Oct 18 16:10:29 neutrino kernel: SoftMAC: Start scanning with channel: 1
Oct 18 16:10:29 neutrino kernel: SoftMAC: Scanning 14 channels
Oct 18 16:10:29 neutrino kernel: bcm43xx: set security called, .level =
0, .enabled = 0, .encrypt = 0
Oct 18 16:10:29 neutrino kernel: bcm43xx: set security called, .level =
0, .enabled = 0, .encrypt = 0
Oct 18 16:10:29 neutrino kernel: bcm43xx: set security called, .level =
0, .enabled = 0, .encrypt = 0
Oct 18 16:10:29 neutrino kernel: bcm43xx: set security called, .level =
0, .enabled = 0, .encrypt = 0
Oct 18 16:10:30 neutrino kernel: SoftMAC: Scanning finished
Oct 18 16:10:30 neutrino kernel: SoftMAC: Associate: Scanning for
networks first.
Oct 18 16:10:30 neutrino kernel: SoftMAC: Start scanning with channel: 1
Oct 18 16:10:30 neutrino kernel: SoftMAC: Scanning 14 channels
Oct 18 16:10:30 neutrino kernel: SoftMAC: Unable to find matching
network after scan!
Oct 18 16:10:30 neutrino kernel: SoftMAC: Scanning finished
Oct 18 16:10:30 neutrino kernel: SoftMAC: Associate: Scanning for
networks first.
Oct 18 16:10:30 neutrino kernel: SoftMAC: Start scanning with channel: 1
Oct 18 16:10:30 neutrino kernel: SoftMAC: Scanning 14 channels
Oct 18 16:10:30 neutrino kernel: SoftMAC: Scanning finished
Oct 18 16:10:30 neutrino kernel: SoftMAC: Associate: Scanning for
networks first.
Oct 18 16:10:30 neutrino kernel: SoftMAC: Start scanning with channel: 1
Oct 18 16:10:30 neutrino kernel: SoftMAC: Scanning 14 channels
Oct 18 16:10:31 neutrino kernel: SoftMAC: Scanning finished
Oct 18 16:10:31 neutrino kernel: SoftMAC: Associate: Scanning for
networks first.
Oct 18 16:10:31 neutrino kernel: SoftMAC: Start scanning with channel: 1
Oct 18 16:10:31 neutrino kernel: SoftMAC: Scanning 14 channels
Oct 18 16:10:31 neutrino kernel: SoftMAC: Scanning finished
Oct 18 16:10:31 neutrino kernel: SoftMAC: Unable to find matching
network after scan!
Oct 18 16:10:31 neutrino kernel: SoftMAC: generic IE set to
30140100000fac040100000fac040100000fac020000
Oct 18 16:10:31 neutrino kernel: SoftMAC: Associate: Scanning for
networks first.
Oct 18 16:10:31 neutrino kernel: SoftMAC: Start scanning with channel: 1
Oct 18 16:10:31 neutrino kernel: SoftMAC: Scanning 14 channels
Oct 18 16:10:31 neutrino kernel: SoftMAC: Queueing Authentication
Request to 00:14:bf:64:bd:38
Oct 18 16:10:31 neutrino kernel: SoftMAC: Cannot associate without being
authenticated, requested authentication
Oct 18 16:10:31 neutrino kernel: SoftMAC: Sent Authentication Request to
00:14:bf:64:bd:38.
Oct 18 16:10:31 neutrino kernel: SoftMAC: Open Authentication completed
with 00:14:bf:64:bd:38
Oct 18 16:10:31 neutrino kernel: SoftMAC: sent association request!
Oct 18 16:10:31 neutrino kernel: SoftMAC: associated!
Oct 18 16:10:31 neutrino kernel: ADDRCONF(NETDEV_CHANGE): eth1: link
becomes ready
Oct 18 16:10:32 neutrino kernel: SoftMAC: Scanning finished
Oct 18 16:10:32 neutrino kernel: SoftMAC: sent association request!
Oct 18 16:10:32 neutrino kernel: bcm43xx: set security called, .level =
0, .enabled = 0, .encrypt = 0
Oct 18 16:10:32 neutrino kernel: bcm43xx: set security called, .level =
0, .enabled = 0, .encrypt = 0
Oct 18 16:10:32 neutrino kernel: bcm43xx: set security called, .level =
0, .enabled = 0, .encrypt = 0
Oct 18 16:10:32 neutrino kernel: bcm43xx: set security called, .level =
0, .enabled = 0, .encrypt = 0
Oct 18 16:10:32 neutrino kernel: bcm43xx: set security called, .level =
0, .enabled = 0, .encrypt = 0
Oct 18 16:10:32 neutrino kernel: SoftMAC: got disassoc frame
Oct 18 16:10:32 neutrino kernel: SoftMAC: sent association request!
Oct 18 16:10:32 neutrino kernel: bcm43xx: set security called, .level =
0, .enabled = 0, .encrypt = 0
Oct 18 16:10:32 neutrino kernel: bcm43xx: set security called, .level =
0, .enabled = 0, .encrypt = 0
Oct 18 16:10:32 neutrino kernel: bcm43xx: set security called, .level =
0, .enabled = 0, .encrypt = 0
Oct 18 16:10:32 neutrino kernel: bcm43xx: set security called, .level =
0, .enabled = 0, .encrypt = 0
Oct 18 16:10:32 neutrino kernel: bcm43xx: set security called, .level =
0, .enabled = 0, .encrypt = 0
Oct 18 16:10:32 neutrino kernel: SoftMAC: got disassoc frame
Oct 18 16:10:32 neutrino kernel: SoftMAC: sent association request!
Oct 18 16:10:32 neutrino kernel: bcm43xx: set security called, .level =
0, .enabled = 0, .encrypt = 0
Oct 18 16:10:32 neutrino kernel: bcm43xx: set security called, .level =
0, .enabled = 0, .encrypt = 0
Oct 18 16:10:32 neutrino kernel: bcm43xx: set security called, .level =
0, .enabled = 0, .encrypt = 0
Oct 18 16:10:32 neutrino kernel: bcm43xx: set security called, .level =
0, .enabled = 0, .encrypt = 0
Oct 18 16:10:32 neutrino kernel: bcm43xx: set security called, .level =
0, .enabled = 0, .encrypt = 0
Oct 18 16:10:32 neutrino kernel: SoftMAC: got disassoc frame
Oct 18 16:10:32 neutrino kernel: SoftMAC: sent association request!
Oct 18 16:10:32 neutrino kernel: bcm43xx: set security called, .level =
0, .enabled = 0, .encrypt = 0
Oct 18 16:10:32 neutrino kernel: bcm43xx: set security called, .level =
0, .enabled = 0, .encrypt = 0
Oct 18 16:10:32 neutrino kernel: bcm43xx: set security called, .level =
0, .enabled = 0, .encrypt = 0
Oct 18 16:10:32 neutrino kernel: bcm43xx: set security called, .level =
0, .enabled = 0, .encrypt = 0
Oct 18 16:10:32 neutrino kernel: bcm43xx: set security called, .level =
0, .enabled = 0, .encrypt = 0
Oct 18 16:10:32 neutrino kernel: SoftMAC: associated!
Oct 18 16:10:32 neutrino kernel: bcm43xx: set security
called, .active_key = 0, .level = 4, .enabled = 1, .encrypt = 1
Oct 18 16:10:32 neutrino kernel: bcm43xx: set security called, .enabled
= 1, .encrypt = 1
------------------------------------------------------------------------------
Before this success, with the same module, I do 4-5 tries with errors of
this type :
Oct 18 16:10:07 neutrino kernel: ACPI: PCI Interrupt 0000:01:09.0[A] ->
Link [APC4] -> GSI 19 (level, low) -> IRQ 74
Oct 18 16:10:07 neutrino kernel: bcm43xx: Chip ID 0x4318, rev 0x2
Oct 18 16:10:07 neutrino kernel: bcm43xx: Number of cores: 4
Oct 18 16:10:07 neutrino kernel: bcm43xx: Core 0: ID 0x800, rev 0xd,
vendor 0x4243, enabled
Oct 18 16:10:07 neutrino kernel: bcm43xx: Core 1: ID 0x812, rev 0x9,
vendor 0x4243, enabled
Oct 18 16:10:07 neutrino kernel: bcm43xx: Core 2: ID 0x804, rev 0xc,
vendor 0x4243, enabled
Oct 18 16:10:07 neutrino kernel: bcm43xx: Core 3: ID 0x80d, rev 0x7,
vendor 0x4243, enabled
Oct 18 16:10:07 neutrino kernel: bcm43xx: PHY connected
Oct 18 16:10:07 neutrino kernel: bcm43xx: Detected PHY: Version: 3, Type
2, Revision 7
Oct 18 16:10:07 neutrino kernel: bcm43xx: Detected Radio: ID: 8205017f
(Manuf: 17f Ver: 2050 Rev: 8)
Oct 18 16:10:07 neutrino kernel: bcm43xx: Radio turned off
Oct 18 16:10:07 neutrino kernel: bcm43xx: Radio turned off
Oct 18 16:10:09 neutrino kernel: bcm43xx: PHY connected
Oct 18 16:10:09 neutrino kernel: bcm43xx: Error: InitVals
"bcm43xx_initval06.fw" not available or load failed.
Oct 18 16:10:09 neutrino kernel: bcm43xx: core_up for active 802.11 core
failed (-2)
Oct 18 16:10:09 neutrino kernel: SoftMAC: empty ratesinfo?
Oct 18 16:10:09 neutrino kernel: SoftMAC: empty ratesinfo?
Oct 18 16:10:09 neutrino kernel: SoftMAC: Associate: Scanning for
networks first.
Oct 18 16:10:09 neutrino kernel: SoftMAC: Associate: failed to initiate
scan. Is device up?
Oct 18 16:10:09 neutrino kernel: firmware_loading_store: unexpected
value (0)
Oct 18 16:10:09 neutrino kernel: bcm43xx: Error: InitVals
"bcm43xx_initval06.fw" not available or load failed.
Oct 18 16:10:09 neutrino kernel: bcm43xx: core_up for active 802.11 core
failed (-2)
Oct 18 16:10:09 neutrino kernel: firmware_loading_store: unexpected
value (0)
Oct 18 16:10:09 neutrino kernel: bcm43xx: Error: PCM "bcm43xx_pcm5.fw"
not available or load failed.
Oct 18 16:10:09 neutrino kernel: bcm43xx: core_up for active 802.11 core
failed (-2)
Oct 18 16:10:09 neutrino kernel: bcm43xx: set security called, .level =
0, .enabled = 0, .encrypt = 0
Oct 18 16:10:09 neutrino kernel: bcm43xx: set security called, .level =
0, .enabled = 0, .encrypt = 0
Oct 18 16:10:09 neutrino kernel: bcm43xx: set security called, .level =
0, .enabled = 0, .encrypt = 0
Oct 18 16:10:09 neutrino kernel: bcm43xx: set security called, .level =
0, .enabled = 0, .encrypt = 0
Oct 18 16:10:13 neutrino kernel: SoftMAC: empty ratesinfo?
Oct 18 16:10:13 neutrino kernel: SoftMAC: empty ratesinfo?
Oct 18 16:10:13 neutrino kernel: SoftMAC: Associate: Scanning for
networks first.
Oct 18 16:10:13 neutrino kernel: SoftMAC: Associate: failed to initiate
scan. Is device up?
Oct 18 16:10:16 neutrino kernel: bcm43xx driver
Maybe a race condition during firmware initiation (I've udev-100)
--------------------------------------------------------------------------------------
Kernel 2.6.18.1 with the 2 patches :
Oct 18 16:03:43 neutrino kernel: SoftMAC: empty ratesinfo?
Oct 18 16:03:43 neutrino kernel: SoftMAC: empty ratesinfo?
Oct 18 16:03:43 neutrino kernel: SoftMAC: Associate: Scanning for
networks first.
Oct 18 16:03:43 neutrino kernel: SoftMAC: Associate: failed to initiate
scan. Is device up?
Oct 18 16:03:48 neutrino kernel: bcm43xx driver
Oct 18 16:03:48 neutrino kernel: ACPI: PCI Interrupt 0000:01:09.0[A] ->
Link [APC4] -> GSI 19 (level, low) -> IRQ 74
Oct 18 16:03:48 neutrino kernel: bcm43xx: Chip ID 0x4318, rev 0x2
Oct 18 16:03:48 neutrino kernel: bcm43xx: Number of cores: 4
Oct 18 16:03:48 neutrino kernel: bcm43xx: Core 0: ID 0x800, rev 0xd,
vendor 0x4243, enabled
Oct 18 16:03:48 neutrino kernel: bcm43xx: Core 1: ID 0x812, rev 0x9,
vendor 0x4243, enabled
Oct 18 16:03:48 neutrino kernel: bcm43xx: Core 2: ID 0x804, rev 0xc,
vendor 0x4243, enabled
Oct 18 16:03:48 neutrino kernel: bcm43xx: Core 3: ID 0x80d, rev 0x7,
vendor 0x4243, enabled
Oct 18 16:03:48 neutrino kernel: bcm43xx: PHY connected
Oct 18 16:03:48 neutrino kernel: bcm43xx: Detected PHY: Version: 3, Type
2, Revision 7
Oct 18 16:03:48 neutrino kernel: bcm43xx: Detected Radio: ID: 8205017f
(Manuf: 17f Ver: 2050 Rev: 8)
Oct 18 16:03:48 neutrino kernel: bcm43xx: Radio turned off
Oct 18 16:03:48 neutrino kernel: bcm43xx: Radio turned off
Oct 18 16:03:49 neutrino kernel: bcm43xx: PHY connected
Oct 18 16:03:50 neutrino kernel: bcm43xx: Microcode rev 0x127, pl 0xe
(2005-04-18 02:36:27)
Oct 18 16:03:50 neutrino kernel: bcm43xx: Radio turned on
Oct 18 16:03:50 neutrino kernel: bcm43xx: ASSERTION FAILED
(radio_attenuation < 10) at:
drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1473:bcm43xx_find_lopair()
Oct 18 16:03:50 neutrino kernel: bcm43xx: ASSERTION FAILED
(radio_attenuation < 10) at:
drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1473:bcm43xx_find_lopair()
Oct 18 16:03:50 neutrino kernel: bcm43xx: ASSERTION FAILED
(radio_attenuation < 10) at:
drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1473:bcm43xx_find_lopair()
Oct 18 16:03:50 neutrino kernel: bcm43xx: Chip initialized
Oct 18 16:03:50 neutrino kernel: bcm43xx: 32-bit DMA initialized
Oct 18 16:03:50 neutrino kernel: bcm43xx: Keys cleared
Oct 18 16:03:50 neutrino kernel: bcm43xx: Selected 802.11 core (phytype
2)
Oct 18 16:03:50 neutrino kernel: bcm43xx: ASSERTION FAILED
(radio_attenuation < 10) at:
drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1473:bcm43xx_find_lopair()
Oct 18 16:03:50 neutrino kernel: SoftMAC: Associate: Scanning for
networks first.
Oct 18 16:03:50 neutrino kernel: SoftMAC: Associate: failed to initiate
scan. Is device up?
Oct 18 16:03:50 neutrino kernel: ADDRCONF(NETDEV_UP): eth1: link is not
ready
Oct 18 16:03:50 neutrino kernel: SoftMAC: empty ratesinfo?
Oct 18 16:03:50 neutrino kernel: SoftMAC: empty ratesinfo?
Oct 18 16:03:50 neutrino kernel: SoftMAC: Associate: Scanning for
networks first.
Oct 18 16:03:50 neutrino kernel: SoftMAC: Start scanning with channel: 1
Oct 18 16:03:50 neutrino kernel: SoftMAC: Scanning 14 channels
Oct 18 16:03:50 neutrino kernel: bcm43xx: set security called, .level =
0, .enabled = 0, .encrypt = 0
Oct 18 16:03:50 neutrino kernel: bcm43xx: set security called, .level =
0, .enabled = 0, .encrypt = 0
Oct 18 16:03:50 neutrino kernel: bcm43xx: set security called, .level =
0, .enabled = 0, .encrypt = 0
Oct 18 16:03:50 neutrino kernel: bcm43xx: set security called, .level =
0, .enabled = 0, .encrypt = 0
Oct 18 16:03:50 neutrino kernel: SoftMAC: Scanning finished
Oct 18 16:03:50 neutrino kernel: SoftMAC: Associate: Scanning for
networks first.
Oct 18 16:03:50 neutrino kernel: SoftMAC: Start scanning with channel: 1
Oct 18 16:03:50 neutrino kernel: SoftMAC: Scanning 14 channels
Oct 18 16:03:50 neutrino kernel: SoftMAC: Unable to find matching
network after scan!
Oct 18 16:03:51 neutrino kernel: SoftMAC: Scanning finished
Oct 18 16:03:51 neutrino kernel: SoftMAC: Associate: Scanning for
networks first.
Oct 18 16:03:51 neutrino kernel: SoftMAC: Start scanning with channel: 1
Oct 18 16:03:51 neutrino kernel: SoftMAC: Scanning 14 channels
Oct 18 16:03:51 neutrino kernel: SoftMAC: Scanning finished
Oct 18 16:03:51 neutrino kernel: SoftMAC: Associate: Scanning for
networks first.
Oct 18 16:03:51 neutrino kernel: SoftMAC: Start scanning with channel: 1
Oct 18 16:03:51 neutrino kernel: SoftMAC: Scanning 14 channels
Oct 18 16:03:51 neutrino kernel: SoftMAC: Scanning finished
Oct 18 16:03:51 neutrino kernel: SoftMAC: Associate: Scanning for
networks first.
Oct 18 16:03:51 neutrino kernel: SoftMAC: Start scanning with channel: 1
Oct 18 16:03:51 neutrino kernel: SoftMAC: Scanning 14 channels
Oct 18 16:03:51 neutrino kernel: SoftMAC: Scanning finished
Oct 18 16:03:51 neutrino kernel: SoftMAC: Unable to find matching
network after scan!
Oct 18 16:03:56 neutrino kernel: SoftMAC: Start scanning with channel: 1
Oct 18 16:03:56 neutrino kernel: SoftMAC: Scanning 14 channels
Oct 18 16:03:57 neutrino kernel: SoftMAC: Scanning finished
Oct 18 16:04:02 neutrino kernel: SoftMAC: Start scanning with channel: 1
Oct 18 16:04:02 neutrino kernel: SoftMAC: Scanning 14 channels
Oct 18 16:04:02 neutrino kernel: SoftMAC: Scanning finished
Oct 18 16:04:07 neutrino kernel: bcm43xx: Radio turned off
Oct 18 16:04:07 neutrino kernel: bcm43xx: DMA-32 0x0200 (RX) max used
slots: 0/64
Oct 18 16:04:07 neutrino kernel: bcm43xx: DMA-32 0x02A0 (TX) max used
slots: 0/512
Oct 18 16:04:07 neutrino kernel: bcm43xx: DMA-32 0x0280 (TX) max used
slots: 0/512
Oct 18 16:04:07 neutrino kernel: bcm43xx: DMA-32 0x0260 (TX) max used
slots: 0/512
Oct 18 16:04:07 neutrino kernel: bcm43xx: DMA-32 0x0240 (TX) max used
slots: 0/512
Oct 18 16:04:07 neutrino kernel: bcm43xx: DMA-32 0x0220 (TX) max used
slots: 2/512
Oct 18 16:04:07 neutrino kernel: bcm43xx: DMA-32 0x0200 (TX) max used
slots: 0/512
Oct 18 16:04:07 neutrino kernel: SoftMAC: empty ratesinfo?
Oct 18 16:04:07 neutrino kernel: SoftMAC: empty ratesinfo?
Oct 18 16:04:07 neutrino kernel: SoftMAC: Associate: Scanning for
networks first.
Oct 18 16:04:07 neutrino kernel: SoftMAC: Associate: failed to initiate
scan. Is device up?
In plus of the firmwrae loading errors, I've never succeed in connecting
to my rooter.
So, the situation is'nt perfect, particularly with the last patch ... I
need to stick with the vanilla kernel for the moment.
Thanks for the good work on this driver !
Didier LINK
> Larry
> _______________________________________________
> Bcm43xx-dev mailing list
> [email protected]
> https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
> ---------------------------------------------------------------------------------------
> Orange vous informe que cet e-mail a ete controle par l'anti-virus mail.
> Aucun virus connu a ce jour par nos services n'a ete detecte.
>
>
>
signature.asc
Description: Ceci est une partie de message numériquement signée
_______________________________________________ Bcm43xx-dev mailing list [email protected] https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
