Hello, while playing with the new 2.6.20 (gentoo) kernel, I got some asserts when putting the machine to sleep (having the bcm43xx blacklisted/unloaded).
bcm43xx: Radio turned off bcm43xx: DMA-32 0x0200 (RX) max used slots: 3/64 bcm43xx: DMA-32 0x02A0 (TX) max used slots: 0/512 bcm43xx: DMA-32 0x0280 (TX) max used slots: 0/512 bcm43xx: DMA-32 0x0260 (TX) max used slots: 0/512 bcm43xx: DMA-32 0x0240 (TX) max used slots: 0/512 bcm43xx: DMA-32 0x0220 (TX) max used slots: 16/512 bcm43xx: ASSERTION FAILED (bcm43xx_status(bcm) == BCM43xx_STAT_INITIALIZED) at: drivers/net/wireless/bcm43xx/bcm43 xx_main.c:1869:bcm43xx_interrupt_handler() and a bit further down done. bcm43xx driver ACPI: PCI Interrupt 0000:03:02.0[A] -> Link [LNKF] -> GSI 10 (level, low) -> IRQ 10 bcm43xx: Chip ID 0x4318, rev 0x2 bcm43xx: Number of cores: 4 bcm43xx: Core 0: ID 0x800, rev 0xd, vendor 0x4243 bcm43xx: Core 1: ID 0x812, rev 0x9, vendor 0x4243 bcm43xx: Core 2: ID 0x804, rev 0xc, vendor 0x4243 bcm43xx: Core 3: ID 0x80d, rev 0x7, vendor 0x4243 bcm43xx: PHY connected bcm43xx: Detected PHY: Version: 3, Type 2, Revision 7 bcm43xx: Detected Radio: ID: 8205017f (Manuf: 17f Ver: 2050 Rev: 8) bcm43xx: Radio turned off bcm43xx: Radio turned off SoftMAC: ASSERTION FAILED (0) at: net/ieee80211/softmac/ieee80211softmac_wx.c:306:ieee80211softmac_wx_get_rate() SoftMAC: ASSERTION FAILED (0) at: net/ieee80211/softmac/ieee80211softmac_wx.c:306:ieee80211softmac_wx_get_rate() Chris
d set 2, code 0xee on isa0060/serio0). atkbd.c: Use 'setkeycodes e06e <keycode>' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xee on isa0060/serio0). atkbd.c: Use 'setkeycodes e06e <keycode>' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xee on isa0060/serio0). atkbd.c: Use 'setkeycodes e06e <keycode>' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xee on isa0060/serio0). atkbd.c: Use 'setkeycodes e06e <keycode>' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xee on isa0060/serio0). atkbd.c: Use 'setkeycodes e06e <keycode>' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xee on isa0060/serio0). atkbd.c: Use 'setkeycodes e06e <keycode>' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xee on isa0060/serio0). atkbd.c: Use 'setkeycodes e06e <keycode>' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xee on isa0060/serio0). atkbd.c: Use 'setkeycodes e06e <keycode>' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xee on isa0060/serio0). atkbd.c: Use 'setkeycodes e06e <keycode>' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xee on isa0060/serio0). atkbd.c: Use 'setkeycodes e06e <keycode>' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xee on isa0060/serio0). atkbd.c: Use 'setkeycodes e06e <keycode>' to make it known. TKIP: replay detected: STA=00:13:10:2f:98:3e previous TSC 00000000aeb7 received TSC 00000000aeb7 PM: Removing info for No Bus:hw_random bcm43xx: Radio turned off bcm43xx: DMA-32 0x0200 (RX) max used slots: 3/64 bcm43xx: DMA-32 0x02A0 (TX) max used slots: 0/512 bcm43xx: DMA-32 0x0280 (TX) max used slots: 0/512 bcm43xx: DMA-32 0x0260 (TX) max used slots: 0/512 bcm43xx: DMA-32 0x0240 (TX) max used slots: 0/512 bcm43xx: DMA-32 0x0220 (TX) max used slots: 16/512 bcm43xx: ASSERTION FAILED (bcm43xx_status(bcm) == BCM43xx_STAT_INITIALIZED) at: drivers/net/wireless/bcm43xx/bcm43xx_main.c:1869:bcm43xx_interrupt_handler() bcm43xx: DMA-32 0x0200 (TX) max used slots: 0/512 ohci_hcd 0000:00:13.1: remove, state 1 usb usb3: USB disconnect, address 1 PM: Removing info for No Bus:usbdev3.1_ep81 PM: Removing info for usb:3-0:1.0 PM: Removing info for No Bus:usbdev3.1_ep00 PM: Removing info for usb:usb3 ohci_hcd 0000:00:13.1: USB bus 3 deregistered ohci_hcd 0000:00:13.0: remove, state 1 usb usb2: USB disconnect, address 1 PM: Removing info for No Bus:usbdev2.1_ep81 PM: Removing info for usb:2-0:1.0 PM: Removing info for No Bus:usbdev2.1_ep00 PM: Removing info for usb:usb2 ohci_hcd 0000:00:13.0: USB bus 2 deregistered PM: Preparing system for mem sleep Stopping tasks ... done. Suspending console(s) platform bluetooth: suspend ac97 1-1:Si3036,8: suspend ac97 0-0:ALC250: suspend hub 1-0:1.0: suspend usb usb1: suspend, may wakeup ide-cdrom 1.0: suspend ide-disk 0.0: suspend i8042 i8042: suspend serial8250 serial8250: suspend platform vesafb.0: suspend pci_express 0000:00:06.0:pcie01: suspend pci_express 0000:00:06.0:pcie00: suspend pci_express 0000:00:02.0:pcie01: suspend pci_express 0000:00:02.0:pcie00: suspend pci 0000:03:09.3: suspend pci 0000:03:09.2: suspend yenta_cardbus 0000:03:09.0: suspend pci 0000:03:02.0: suspend tg3 0000:02:00.0: suspend pci 0000:01:00.0: suspend pci 0000:00:18.3: suspend pci 0000:00:18.2: suspend pci 0000:00:18.1: suspend pci 0000:00:18.0: suspend ATI IXP MC97 controller 0000:00:14.6: suspend ATI IXP AC97 controller 0000:00:14.5: suspend pci 0000:00:14.4: suspend pci 0000:00:14.3: suspend ATIIXP_IDE 0000:00:14.1: suspend piix4_smbus 0000:00:14.0: suspend ehci_hcd 0000:00:13.2: suspend pci 0000:00:13.1: suspend pci 0000:00:13.0: suspend pcieport-driver 0000:00:06.0: suspend pcieport-driver 0000:00:02.0: suspend pci 0000:00:00.0: suspend acpi acpi: suspend PM: Entering mem sleep platform bluetooth: LATE suspend i8042 i8042: LATE suspend serial8250 serial8250: LATE suspend platform vesafb.0: LATE suspend pci 0000:03:09.3: LATE suspend pci 0000:03:09.2: LATE suspend yenta_cardbus 0000:03:09.0: LATE suspend pci 0000:03:02.0: LATE suspend tg3 0000:02:00.0: LATE suspend pci 0000:01:00.0: LATE suspend pci 0000:00:18.3: LATE suspend pci 0000:00:18.2: LATE suspend pci 0000:00:18.1: LATE suspend pci 0000:00:18.0: LATE suspend ATI IXP MC97 controller 0000:00:14.6: LATE suspend ATI IXP AC97 controller 0000:00:14.5: LATE suspend pci 0000:00:14.4: LATE suspend pci 0000:00:14.3: LATE suspend ATIIXP_IDE 0000:00:14.1: LATE suspend piix4_smbus 0000:00:14.0: LATE suspend pci 0000:00:13.1: LATE suspend pci 0000:00:13.0: LATE suspend pcieport-driver 0000:00:06.0: LATE suspend pcieport-driver 0000:00:02.0: LATE suspend pci 0000:00:00.0: LATE suspend Back to C! pci 0000:00:00.0: EARLY resume pcieport-driver 0000:00:02.0: EARLY resume pcieport-driver 0000:00:06.0: EARLY resume pci 0000:00:13.0: EARLY resume pci 0000:00:13.1: EARLY resume ehci_hcd 0000:00:13.2: EARLY resume piix4_smbus 0000:00:14.0: EARLY resume ATIIXP_IDE 0000:00:14.1: EARLY resume pci 0000:00:14.3: EARLY resume pci 0000:00:14.4: EARLY resume ATI IXP AC97 controller 0000:00:14.5: EARLY resume ATI IXP MC97 controller 0000:00:14.6: EARLY resume pci 0000:00:18.0: EARLY resume pci 0000:00:18.1: EARLY resume pci 0000:00:18.2: EARLY resume pci 0000:00:18.3: EARLY resume pci 0000:01:00.0: EARLY resume tg3 0000:02:00.0: EARLY resume pci 0000:03:02.0: EARLY resume yenta_cardbus 0000:03:09.0: EARLY resume pci 0000:03:09.2: EARLY resume pci 0000:03:09.3: EARLY resume platform vesafb.0: EARLY resume serial8250 serial8250: EARLY resume i8042 i8042: EARLY resume platform bluetooth: EARLY resume PM: Finishing wakeup. acpi acpi: resuming pci 0000:00:00.0: resuming PM: Writing back config space on device 0000:00:00.0 at offset 3 (was 0, writing 4000) pcieport-driver 0000:00:02.0: resuming PM: Writing back config space on device 0000:00:02.0 at offset f (was ff, writing f00ff) PM: Writing back config space on device 0000:00:02.0 at offset 9 (was 0, writing cff0c800) PM: Writing back config space on device 0000:00:02.0 at offset 8 (was 0, writing c010c010) PM: Writing back config space on device 0000:00:02.0 at offset 7 (was 101, writing 9191) PM: Writing back config space on device 0000:00:02.0 at offset 6 (was 0, writing 10100) PM: Writing back config space on device 0000:00:02.0 at offset 3 (was 10000, writing 10008) PM: Writing back config space on device 0000:00:02.0 at offset 1 (was 100000, writing 100007) PCI: Setting latency timer of device 0000:00:02.0 to 64 pcieport-driver 0000:00:06.0: resuming PM: Writing back config space on device 0000:00:06.0 at offset f (was ff, writing 400ff) PM: Writing back config space on device 0000:00:06.0 at offset 9 (was 0, writing fff0) PM: Writing back config space on device 0000:00:06.0 at offset 8 (was 0, writing c020c020) PM: Writing back config space on device 0000:00:06.0 at offset 7 (was 101, writing 200001f1) PM: Writing back config space on device 0000:00:06.0 at offset 6 (was 0, writing 20200) PM: Writing back config space on device 0000:00:06.0 at offset 3 (was 10000, writing 10008) PM: Writing back config space on device 0000:00:06.0 at offset 1 (was 100000, writing 100007) PCI: Setting latency timer of device 0000:00:06.0 to 64 pci 0000:00:13.0: resuming PM: Writing back config space on device 0000:00:13.0 at offset 3 (was 804008, writing 804010) PM: Writing back config space on device 0000:00:13.0 at offset 1 (was 2b00017, writing 2b00013) pci 0000:00:13.1: resuming PM: Writing back config space on device 0000:00:13.1 at offset 1 (was 2b00017, writing 2b00013) ehci_hcd 0000:00:13.2: resuming ACPI: PCI Interrupt 0000:00:13.2[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 piix4_smbus 0000:00:14.0: resuming ATIIXP_IDE 0000:00:14.1: resuming ACPI: PCI Interrupt 0000:00:14.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 pci 0000:00:14.3: resuming pci 0000:00:14.4: resuming PM: Writing back config space on device 0000:00:14.4 at offset f (was 0, writing 40000) PM: Writing back config space on device 0000:00:14.4 at offset 9 (was fff0, writing 53f05000) PM: Writing back config space on device 0000:00:14.4 at offset 7 (was 228001f1, writing 22802121) PM: Writing back config space on device 0000:00:14.4 at offset 6 (was 40070600, writing 40070300) ATI IXP AC97 controller 0000:00:14.5: resuming PM: Writing back config space on device 0000:00:14.5 at offset 1 (was 4300017, writing 4300013) ACPI: PCI Interrupt 0000:00:14.5[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 atiixp: codec reset timeout ATI IXP MC97 controller 0000:00:14.6: resuming PM: Writing back config space on device 0000:00:14.6 at offset 1 (was 4300017, writing 4300013) ACPI: PCI Interrupt 0000:00:14.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 pci 0000:00:18.0: resuming pci 0000:00:18.1: resuming pci 0000:00:18.2: resuming pci 0000:00:18.3: resuming pci 0000:01:00.0: resuming tg3 0000:02:00.0: resuming pci 0000:03:02.0: resuming PM: Writing back config space on device 0000:03:02.0 at offset f (was 100, writing 10b) PM: Writing back config space on device 0000:03:02.0 at offset 4 (was 0, writing c0304000) PM: Writing back config space on device 0000:03:02.0 at offset 3 (was 0, writing 4000) PM: Writing back config space on device 0000:03:02.0 at offset 1 (was 0, writing 2) yenta_cardbus 0000:03:09.0: resuming PM: Writing back config space on device 0000:03:09.0 at offset f (was 34001ff, writing 5c0010b) PM: Writing back config space on device 0000:03:09.0 at offset e (was 0, writing 24fc) PM: Writing back config space on device 0000:03:09.0 at offset d (was 0, writing 2400) PM: Writing back config space on device 0000:03:09.0 at offset c (was 0, writing 20fc) PM: Writing back config space on device 0000:03:09.0 at offset b (was 0, writing 2000) PM: Writing back config space on device 0000:03:09.0 at offset a (was 0, writing 57fff000) PM: Writing back config space on device 0000:03:09.0 at offset 9 (was 0, writing 54000000) PM: Writing back config space on device 0000:03:09.0 at offset 8 (was 0, writing 53fff000) PM: Writing back config space on device 0000:03:09.0 at offset 7 (was 0, writing 50000000) PM: Writing back config space on device 0000:03:09.0 at offset 6 (was 0, writing b0070403) PM: Writing back config space on device 0000:03:09.0 at offset 4 (was 0, writing c0308000) PM: Writing back config space on device 0000:03:09.0 at offset 3 (was 820000, writing 82a810) PM: Writing back config space on device 0000:03:09.0 at offset 1 (was 2100000, writing 2100007) pci 0000:03:09.2: resuming PM: Writing back config space on device 0000:03:09.2 at offset f (was 4030300, writing 403030b) PM: Writing back config space on device 0000:03:09.2 at offset 5 (was 0, writing c0300000) PM: Writing back config space on device 0000:03:09.2 at offset 4 (was 0, writing c0309000) PM: Writing back config space on device 0000:03:09.2 at offset 3 (was 800000, writing 804008) PM: Writing back config space on device 0000:03:09.2 at offset 1 (was 2100000, writing 2100016) pci 0000:03:09.3: resuming PM: Writing back config space on device 0000:03:09.3 at offset f (was 40701ff, writing 407010b) PM: Writing back config space on device 0000:03:09.3 at offset 4 (was 0, writing c0306000) PM: Writing back config space on device 0000:03:09.3 at offset 3 (was 800000, writing 804008) PM: Writing back config space on device 0000:03:09.3 at offset 1 (was 2100000, writing 2100006) pci_express 0000:00:02.0:pcie00: resuming pci_express 0000:00:02.0:pcie01: resuming pci_express 0000:00:06.0:pcie00: resuming pci_express 0000:00:06.0:pcie01: resuming platform vesafb.0: resuming serial8250 serial8250: resuming i8042 i8042: resuming atkbd serio0: resuming serio serio1: resuming serio serio2: resuming serio serio3: resuming serio serio4: resuming ide-disk 0.0: resuming ide-cdrom 1.0: resuming usb usb1: resuming hub 1-0:1.0: resuming ac97 0-0:ALC250: resuming ac97 1-1:Si3036,8: resuming platform bluetooth: resuming Restarting tasks ... <7>PM: Adding info for No Bus:vcs63 PM: Adding info for No Bus:vcsa63 PM: Removing info for No Bus:vcs63 PM: Removing info for No Bus:vcsa63 done. bcm43xx driver ACPI: PCI Interrupt 0000:03:02.0[A] -> Link [LNKF] -> GSI 10 (level, low) -> IRQ 10 bcm43xx: Chip ID 0x4318, rev 0x2 bcm43xx: Number of cores: 4 bcm43xx: Core 0: ID 0x800, rev 0xd, vendor 0x4243 bcm43xx: Core 1: ID 0x812, rev 0x9, vendor 0x4243 bcm43xx: Core 2: ID 0x804, rev 0xc, vendor 0x4243 bcm43xx: Core 3: ID 0x80d, rev 0x7, vendor 0x4243 bcm43xx: PHY connected bcm43xx: Detected PHY: Version: 3, Type 2, Revision 7 bcm43xx: Detected Radio: ID: 8205017f (Manuf: 17f Ver: 2050 Rev: 8) bcm43xx: Radio turned off bcm43xx: Radio turned off SoftMAC: ASSERTION FAILED (0) at: net/ieee80211/softmac/ieee80211softmac_wx.c:306:ieee80211softmac_wx_get_rate() SoftMAC: ASSERTION FAILED (0) at: net/ieee80211/softmac/ieee80211softmac_wx.c:306:ieee80211softmac_wx_get_rate() ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.0: irq 11, io mem 0xc0000000 PM: Adding info for usb:usb2 PM: Adding info for No Bus:usbdev2.1_ep00 usb usb2: configuration #1 chosen from 1 choice PM: Adding info for usb:2-0:1.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected PM: Adding info for No Bus:usbdev2.1_ep81 ACPI: PCI Interrupt 0000:00:13.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.1: irq 11, io mem 0xc0001000 PM: Adding info for usb:usb3 PM: Adding info for No Bus:usbdev3.1_ep00 usb usb3: configuration #1 chosen from 1 choice PM: Adding info for usb:3-0:1.0 hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected PM: Adding info for No Bus:usbdev3.1_ep81 Synaptics Touchpad, model: 1, fw: 5.9, id: 0x126eb1, caps: 0xa04713/0x4000 input: SynPS/2 Synaptics TouchPad as /class/input/input6 PM: Adding info for No Bus:vcs15 PM: Adding info for No Bus:vcsa15 PM: Removing info for No Bus:vcs15 PM: Removing info for No Bus:vcsa15 SoftMAC: ASSERTION FAILED (0) at: net/ieee80211/softmac/ieee80211softmac_wx.c:306:ieee80211softmac_wx_get_rate() SoftMAC: ASSERTION FAILED (0) at: net/ieee80211/softmac/ieee80211softmac_wx.c:306:ieee80211softmac_wx_get_rate() bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 SoftMAC: Associate: Scanning for networks first. SoftMAC: Associate: failed to initiate scan. Is device up? atkbd.c: Unknown key pressed (translated set 2, code 0xd6 on isa0060/serio0). atkbd.c: Use 'setkeycodes e056 <keycode>' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xd6 on isa0060/serio0). atkbd.c: Use 'setkeycodes e056 <keycode>' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xd5 on isa0060/serio0). atkbd.c: Use 'setkeycodes e055 <keycode>' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xd5 on isa0060/serio0). atkbd.c: Use 'setkeycodes e055 <keycode>' to make it known.
pgpvDMtK9judy.pgp
Description: PGP signature
_______________________________________________ Bcm43xx-dev mailing list Bcm43xx-dev@lists.berlios.de https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
