hi all i try to connect to another pc in ad-hoc mode i using b43 module from wireless-dev on (wlan1) and another pc is linksys wusb54g rev4 (wlan0) boot pc's are debian testing in pc 2 (wlan1) have 2.6.22.3-amd64
iwconfig wlan1 mode ad-hoc essid docksud channel 4 ifconfig wlan1 192.168.77.1 up wlan1 IEEE 802.11g ESSID:"docksud" Mode:Ad-Hoc Frequency:2.427 GHz Cell: F2:37:F0:30:AB:D0 Tx-Power=27 dBm Retry min limit:7 RTS thr:off Fragment thr=2346 B Encryption key:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 i do scann: iwlist wlan1 s wlan1 Scan completed : Cell 01 - Address: 06:50:23:CE:FA:00 ESSID:"docksud" Mode:Ad-Hoc Channel:4 Frequency:2.427 GHz (Channel 4) Quality=95/100 Signal level=-39 dBm Noise level=-62 dBm Encryption key:off Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Extra:tsf=000000001207f671 i see the other cell. and the interface on the other machine that is an linksys using rt2500usb have the same cell : [EMAIL PROTECTED]:~# iwconfig wlan0 wlan0 IEEE 802.11g ESSID:"docksud" Mode:Ad-Hoc Frequency:2.427 GHz Cell: 06:50:23:CE:FA:00 Retry min limit:7 RTS thr:off Fragment thr=2346 B Encryption key:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 i try to ping and dont get reply's [EMAIL PROTECTED]:~# ping 192.168.77.2 PING 192.168.77.2 (192.168.77.2) 56(84) bytes of data. From 192.168.77.1 icmp_seq=2 Destination Host Unreachable From 192.168.77.1 icmp_seq=3 Destination Host Unreachable From 192.168.77.1 icmp_seq=4 Destination Host Unreachable my dmesg (wlan1) ---------- wlan1: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) HW CONFIG: channel=1 freq=2412 phymode=2 HW CONFIG: channel=2 freq=2417 phymode=2 HW CONFIG: channel=3 freq=2422 phymode=2 HW CONFIG: channel=4 freq=2427 phymode=2 HW CONFIG: channel=5 freq=2432 phymode=2 HW CONFIG: channel=6 freq=2437 phymode=2 HW CONFIG: channel=7 freq=2442 phymode=2 HW CONFIG: channel=8 freq=2447 phymode=2 HW CONFIG: channel=9 freq=2452 phymode=2 HW CONFIG: channel=10 freq=2457 phymode=2 HW CONFIG: channel=11 freq=2462 phymode=2 HW CONFIG: channel=4 freq=2427 phymode=2 wlan1: sta_find_ibss (active_ibss=0) bssid=0e:46:3e:1e:fa:18 found sta_find_ibss: selected 0e:46:3e:1e:fa:18 current f2:37:f0:30:ab:d0 did not try to join ibss phy1: Adding new IBSS station 00:12:17:73:13:61 (dev=wlan1) phy1: Added STA 00:12:17:73:13:61 wlan1: RX ProbeReq SA=00:12:17:73:13:61 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1) wlan1: Sending ProbeResp to 00:12:17:73:13:61 wlan1: RX ProbeReq SA=00:12:17:73:13:61 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1) wlan1: Sending ProbeResp to 00:12:17:73:13:61 wlan1: RX ProbeReq SA=00:12:17:73:13:61 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1) wlan1: Sending ProbeResp to 00:12:17:73:13:61 wlan1: RX ProbeReq SA=00:12:17:73:13:61 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1) wlan1: Sending ProbeResp to 00:12:17:73:13:61 wlan1: RX ProbeReq SA=00:12:17:73:13:61 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1) wlan1: Sending ProbeResp to 00:12:17:73:13:61 wlan1: sta_find_ibss (active_ibss=0) bssid=0e:46:3e:1e:fa:18 found sta_find_ibss: selected 0e:46:3e:1e:fa:18 current f2:37:f0:30:ab:d0 did not try to join ibss wlan1: Trigger new scan to find an IBSS to join HW CONFIG: channel=1 freq=2412 phymode=2 HW CONFIG: channel=2 freq=2417 phymode=2 HW CONFIG: channel=3 freq=2422 phymode=2 HW CONFIG: channel=4 freq=2427 phymode=2 HW CONFIG: channel=5 freq=2432 phymode=2 HW CONFIG: channel=6 freq=2437 phymode=2 HW CONFIG: channel=7 freq=2442 phymode=2 HW CONFIG: channel=8 freq=2447 phymode=2 HW CONFIG: channel=9 freq=2452 phymode=2 HW CONFIG: channel=10 freq=2457 phymode=2 HW CONFIG: channel=11 freq=2462 phymode=2 HW CONFIG: channel=4 freq=2427 phymode=2 wlan1: sta_find_ibss (active_ibss=0) bssid=0e:46:3e:1e:fa:18 found sta_find_ibss: selected 0e:46:3e:1e:fa:18 current f2:37:f0:30:ab:d0 did not try to join ibss wlan1: Creating new IBSS network, BSSID 0e:e6:8e:61:bd:fd phy1: Removed STA 00:12:17:73:13:61 HW CONFIG: channel=4 freq=2427 phymode=2 wlan1: Failed to configure IBSS beacon template the rt2500usb dmegs (wlan0): ----------------------------------------------- wlan0: Trigger new scan to find an IBSS to join wlan0: Trigger new scan to find an IBSS to join wlan0: Trigger new scan to find an IBSS to join wlan0: Creating new IBSS network, BSSID 06:50:23:ce:fa:00 wlan0: Configured IBSS beacon template based on scan results wmaster0: Adding new IBSS station 00:14:a5:f5:85:ed (dev=wlan0) wlan0: expiring inactive STA 00:14:a5:f5:85:ed wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) wmaster0: Adding new IBSS station 00:14:a5:f5:85:ed (dev=wlan0) wlan0: expiring inactive STA 00:14:a5:f5:85:ed wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) wmaster0: Adding new IBSS station 00:14:a5:f5:85:ed (dev=wlan0) wlan0: expiring inactive STA 00:14:a5:f5:85:ed wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) wmaster0: Adding new IBSS station 00:14:a5:f5:85:ed (dev=wlan0) wlan0: expiring inactive STA 00:14:a5:f5:85:ed wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) wmaster0: Adding new IBSS station 00:14:a5:f5:85:ed (dev=wlan0) wlan0: expiring inactive STA 00:14:a5:f5:85:ed wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) wmaster0: Adding new IBSS station 00:14:a5:f5:85:ed (dev=wlan0) wlan0: expiring inactive STA 00:14:a5:f5:85:ed wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) wmaster0: Adding new IBSS station 00:14:a5:f5:85:ed (dev=wlan0) wlan0: expiring inactive STA 00:14:a5:f5:85:ed wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) wmaster0: Adding new IBSS station 00:14:a5:f5:85:ed (dev=wlan0) wlan0: expiring inactive STA 00:14:a5:f5:85:ed wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) wmaster0: Adding new IBSS station 00:14:a5:f5:85:ed (dev=wlan0) wlan0: expiring inactive STA 00:14:a5:f5:85:ed wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) wmaster0: Adding new IBSS station 00:14:a5:f5:85:ed (dev=wlan0) wlan0: expiring inactive STA 00:14:a5:f5:85:ed wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) wmaster0: Adding new IBSS station 00:14:a5:f5:85:ed (dev=wlan0) wlan0: expiring inactive STA 00:14:a5:f5:85:ed wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) wmaster0: Adding new IBSS station 00:14:a5:f5:85:ed (dev=wlan0) wlan0: expiring inactive STA 00:14:a5:f5:85:ed wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) can i forgot some step? any idea to do more tests? Thanks! -- Dock Sud BBS http://www.docksud.com.ar telnet://bbs.docksud.com.ar
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ Bcm43xx-dev mailing list Bcm43xx-dev@lists.berlios.de https://lists.berlios.de/mailman/listinfo/bcm43xx-dev