John, did you drop this patch? I can't see it in git and your latest push,
while a patch submitted later is in there.

On Friday 25 April 2008, Michael Buesch wrote:
> This fixes some TX/RX related locking issues.
> With this patch applied, some of the PHY transmission errors are fixed.
> 
> Signed-off-by: Michael Buesch <[EMAIL PROTECTED]>
> 
> ---
> 
> John, this is for 2.6.26.
> 
> 
> Index: wireless-testing/drivers/net/wireless/b43/b43.h
> ===================================================================
> --- wireless-testing.orig/drivers/net/wireless/b43/b43.h      2008-04-24 
> 19:42:55.000000000 +0200
> +++ wireless-testing/drivers/net/wireless/b43/b43.h   2008-04-25 
> 19:28:42.000000000 +0200
> @@ -688,12 +688,16 @@ struct b43_wl {
>       struct b43_wldev *current_dev;
>       /* Pointer to the ieee80211 hardware data structure */
>       struct ieee80211_hw *hw;
>  
>       struct mutex mutex;
>       spinlock_t irq_lock;
> +     /* R/W lock for data transmission.
> +      * Transmissions on 2+ queues can run concurrently, but somebody else
> +      * might sync with TX by write_lock_irqsave()'ing. */
> +     rwlock_t tx_lock;
>       /* Lock for LEDs access. */
>       spinlock_t leds_lock;
>       /* Lock for SHM access. */
>       spinlock_t shm_lock;
>  
>       /* We can only have one operating interface (802.11 core)
> Index: wireless-testing/drivers/net/wireless/b43/main.c
> ===================================================================
> --- wireless-testing.orig/drivers/net/wireless/b43/main.c     2008-04-24 
> 19:42:55.000000000 +0200
> +++ wireless-testing/drivers/net/wireless/b43/main.c  2008-04-25 
> 18:47:08.000000000 +0200
> @@ -726,12 +726,13 @@ static void b43_synchronize_irq(struct b
>  
>  /* DummyTransmission function, as documented on
>   * http://bcm-specs.sipsolutions.net/DummyTransmission
>   */
>  void b43_dummy_transmission(struct b43_wldev *dev)
>  {
> +     struct b43_wl *wl = dev->wl;
>       struct b43_phy *phy = &dev->phy;
>       unsigned int i, max_loop;
>       u16 value;
>       u32 buffer[5] = {
>               0x00000000,
>               0x00D40000,
> @@ -752,12 +753,15 @@ void b43_dummy_transmission(struct b43_w
>               break;
>       default:
>               B43_WARN_ON(1);
>               return;
>       }
>  
> +     spin_lock_irq(&wl->irq_lock);
> +     write_lock(&wl->tx_lock);
> +
>       for (i = 0; i < 5; i++)
>               b43_ram_write(dev, i * 4, buffer[i]);
>  
>       /* Commit writes */
>       b43_read32(dev, B43_MMIO_MACCTL);
>  
> @@ -792,12 +796,15 @@ void b43_dummy_transmission(struct b43_w
>               if (!(value & 0x0100))
>                       break;
>               udelay(10);
>       }
>       if (phy->radio_ver == 0x2050 && phy->radio_rev <= 0x5)
>               b43_radio_write16(dev, 0x0051, 0x0037);
> +
> +     write_unlock(&wl->tx_lock);
> +     spin_unlock_irq(&wl->irq_lock);
>  }
>  
>  static void key_write(struct b43_wldev *dev,
>                     u8 index, u8 algorithm, const u8 * key)
>  {
>       unsigned int i;
> @@ -2821,30 +2828,37 @@ static int b43_rng_init(struct b43_wl *w
>  static int b43_op_tx(struct ieee80211_hw *hw,
>                    struct sk_buff *skb,
>                    struct ieee80211_tx_control *ctl)
>  {
>       struct b43_wl *wl = hw_to_b43_wl(hw);
>       struct b43_wldev *dev = wl->current_dev;
> -     int err = -ENODEV;
> +     unsigned long flags;
> +     int err;
>  
>       if (unlikely(skb->len < 2 + 2 + 6)) {
>               /* Too short, this can't be a valid frame. */
> -             return -EINVAL;
> +             dev_kfree_skb_any(skb);
> +             return NETDEV_TX_OK;
>       }
>       B43_WARN_ON(skb_shinfo(skb)->nr_frags);
> -
>       if (unlikely(!dev))
> -             goto out;
> -     if (unlikely(b43_status(dev) < B43_STAT_STARTED))
> -             goto out;
> -     /* TX is done without a global lock. */
> -     if (b43_using_pio_transfers(dev))
> -             err = b43_pio_tx(dev, skb, ctl);
> -     else
> -             err = b43_dma_tx(dev, skb, ctl);
> -out:
> +             return NETDEV_TX_BUSY;
> +
> +     /* Transmissions on seperate queues can run concurrently. */
> +     read_lock_irqsave(&wl->tx_lock, flags);
> +
> +     err = -ENODEV;
> +     if (likely(b43_status(dev) >= B43_STAT_STARTED)) {
> +             if (b43_using_pio_transfers(dev))
> +                     err = b43_pio_tx(dev, skb, ctl);
> +             else
> +                     err = b43_dma_tx(dev, skb, ctl);
> +     }
> +
> +     read_unlock_irqrestore(&wl->tx_lock, flags);
> +
>       if (unlikely(err))
>               return NETDEV_TX_BUSY;
>       return NETDEV_TX_OK;
>  }
>  
>  /* Locking: wl->irq_lock */
> @@ -3457,23 +3471,23 @@ static void b43_wireless_core_stop(struc
>       spin_lock_irqsave(&wl->irq_lock, flags);
>       dev->irq_savedstate = b43_interrupt_disable(dev, B43_IRQ_ALL);
>       b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); /* flush */
>       spin_unlock_irqrestore(&wl->irq_lock, flags);
>       b43_synchronize_irq(dev);
>  
> +     write_lock_irqsave(&wl->tx_lock, flags);
>       b43_set_status(dev, B43_STAT_INITIALIZED);
> +     write_unlock_irqrestore(&wl->tx_lock, flags);
>  
>       b43_pio_stop(dev);
>       mutex_unlock(&wl->mutex);
>       /* Must unlock as it would otherwise deadlock. No races here.
>        * Cancel the possibly running self-rearming periodic work. */
>       cancel_delayed_work_sync(&dev->periodic_work);
>       mutex_lock(&wl->mutex);
>  
> -     ieee80211_stop_queues(wl->hw);  //FIXME this could cause a deadlock, as 
> mac80211 seems buggy.
> -
>       b43_mac_suspend(dev);
>       free_irq(dev->dev->irq, dev);
>       b43dbg(wl, "Wireless interface stopped\n");
>  }
>  
>  /* Locking: wl->mutex */
> @@ -4471,12 +4485,13 @@ static int b43_wireless_init(struct ssb_
>  
>       /* Get and initialize struct b43_wl */
>       wl = hw_to_b43_wl(hw);
>       memset(wl, 0, sizeof(*wl));
>       wl->hw = hw;
>       spin_lock_init(&wl->irq_lock);
> +     rwlock_init(&wl->tx_lock);
>       spin_lock_init(&wl->leds_lock);
>       spin_lock_init(&wl->shm_lock);
>       mutex_init(&wl->mutex);
>       INIT_LIST_HEAD(&wl->devlist);
>       INIT_WORK(&wl->qos_update_work, b43_qos_update_work);
>       INIT_WORK(&wl->beacon_update_trigger, b43_beacon_update_trigger_work);
> 


_______________________________________________
Bcm43xx-dev mailing list
Bcm43xx-dev@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/bcm43xx-dev

Reply via email to