Don't use the meta-ti layer. It's got...issues... It sort-of works with BeagleBone- but the meta-beaglebone one is the one they're using to make the official images with from my current understanding. Works correctly with Poky or Angstrom.
On Monday, October 7, 2013 7:17:03 AM UTC-6, say...@gmail.com wrote: > > Step 1.) I followed this post to build Poky for the BBB: > https://gist.github.com/errordeveloper/4056193 > > Step 2.) I followed this to setup the SD card: > https://pixhawk.ethz.ch/tutorials/omap/boot_from_sd_sdhc > > Step 3.) I followed this for deploying my artifacts (MLO, u-boot, uImage & > file system) > https://pixhawk.ethz.ch/tutorials/omap/copy_sd_card > > I have also tried to swap out Step 2 above for the mkcard.txt script found > here: > http://downloads.angstrom-distribution.org/demo/beaglebone/ > > In all cases, I attempt to boot the BBB and I do not get anything over the > HDMI display and nothing hits my routers DHCP server to receive an IP > address. > > I do not have an FTDI Cable but can buy one if that is the logical next > step in debugging. > > Any advice? Without an FTDI Cable, is there anyway to watch the boot > process? > > Is the new Boot partition necessary (uImage, u-boot, MLO) or can I simply > deploy the file system to the SD card? > > Sorry for the Newbie question! > > ~ Sayguh > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
