On Wed, Oct 23, 2013 at 5:54 PM, mickeyf <mic...@thesweetoasis.com> wrote: > Yes, I was definitely getting the impression that without signing up for the > $15K fee I could not view a legal copy of the spec. If I can find a monitor > or two that work with the BBB and that have known behavior that's plenty > good enough. Section 8.5 Hot plug detect..."..does not indicate whether or > not the sink is powered on..." > > I would have thought that a way to query whether a device was powered, > asleep, or awake, and a command to wake it up if asleep would be obvious and > available, and perhaps they are to people who aren't me. > > Based on the very quick glance I have given it, it looks like CEC may be > more intended for this (Section 14?), but even if that's so it's less > supported on the BBB. At least I have a better idea where to look now. > Thanks again.
Digging more into it.. "4.2.7 +5V Power Signal" looks like the hdmi cable is suppost to power it enough to get the i2c eeprom data.. btw... All this talk.. Have you tried the "parse-edid" while connected the bbb to a un-powered monitor? Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.