Is there any one... who can help?
On Sunday, 13 October 2013 13:51:27 UTC+5:30, vinayak aghor wrote: > > I did try following but I did nto get break through > > - /sbin/route add default gw 192.168.7.1 > - echo "nameserver 8.8.8.8" >> /etc/resolv.conf > > Please help > > > On Sunday, 13 October 2013 12:29:39 UTC+5:30, vinayak aghor wrote: >> >> >> Hello, >> I say share internet connection on 3G modem by following procedure >> properties --> sharing --> select the LAN connection .. then press ok >> >> Sharing is done. >> >> But , OS (Vista) assigns that LAN connection a IP : 192.168.0.1 & net >> mask as : 255.255.255.0 >> >> This is not in range of 192.168.7.2 of BBB. >> >> Because of this my connection between BBB & PC breaks. So I can not SSH >> into BBB. >> >> Regards, >> Vinayak >> >> >> >> >> On Sunday, 13 October 2013 11:29:32 UTC+5:30, Wulf Man wrote: >>> >>> enable internet connection sharing on your windows machine >>> >>> >>> On 10/12/2013 10:13 PM, vinayak aghor wrote: >>> > Hello, >>> > I have BBB, laptop with Vista & 3G datacard. I wan to connect beagle >>> > bone black to laptop then I wan to access internet connetion of laptop >>> > to with BBB. >>> > Currently following is status >>> > >>> ------------------------------------------------------------------------------------------- >>> >>> >>> > root@beaglebone:~# ping www.google.com >>> > ping: unknown host www.google.com >>> > >>> > root@beaglebone:~# ifconfig >>> > eth0 Link encap:Ethernet HWaddr 90:59:AF:57:42:18 >>> > UP BROADCAST MULTICAST MTU:1500 Metric:1 >>> > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 >>> > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 >>> > collisions:0 txqueuelen:1000 >>> > RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) >>> > Interrupt:56 >>> > >>> > lo Link encap:Local Loopback >>> > inet addr:127.0.0.1 Mask:255.0.0.0 >>> > inet6 addr: ::1/128 Scope:Host >>> > UP LOOPBACK RUNNING MTU:65536 Metric:1 >>> > RX packets:24 errors:0 dropped:0 overruns:0 frame:0 >>> > TX packets:24 errors:0 dropped:0 overruns:0 carrier:0 >>> > collisions:0 txqueuelen:0 >>> > RX bytes:1768 (1.7 KiB) TX bytes:1768 (1.7 KiB) >>> > >>> > usb0 Link encap:Ethernet HWaddr 8A:56:DB:0A:72:13 >>> > inet addr:192.168.7.2 Bcast:192.168.7.3 >>> Mask:255.255.255.252 >>> > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 >>> > RX packets:479 errors:0 dropped:0 overruns:0 frame:0 >>> > TX packets:182 errors:0 dropped:0 overruns:0 carrier:0 >>> > collisions:0 txqueuelen:1000 >>> > RX bytes:48037 (46.9 KiB) TX bytes:33271 (32.4 KiB) >>> > >>> > >>> --------------------------------------------------------------------------------------------------- >>> >>> >>> > >>> > root@beaglebone:~# ping -i 0.5 192.168.7.1 >>> > PING 192.168.7.1 (192.168.7.1) 56(84) bytes of data. >>> > 64 bytes from 192.168.7.1: icmp_req=1 ttl=128 time=0.719 ms >>> > 64 bytes from 192.168.7.1: icmp_req=2 ttl=128 time=0.670 ms >>> > 64 bytes from 192.168.7.1: icmp_req=3 ttl=128 time=0.577 ms >>> > 64 bytes from 192.168.7.1: icmp_req=4 ttl=128 time=0.745 ms >>> > ^C >>> > --- 192.168.7.1 ping statistics --- >>> > 4 packets transmitted, 4 received, 0% packet loss, time 1503ms >>> > rtt min/avg/max/mdev = 0.577/0.677/0.745/0.071 ms >>> > >>> -------------------------------------------------------------------------------------------------------------- >>> >>> >>> > >>> > root@beaglebone:~# ping -i 0.5 192.168.7.2 >>> > PING 192.168.7.2 (192.168.7.2) 56(84) bytes of data. >>> > 64 bytes from 192.168.7.2: icmp_req=1 ttl=64 time=0.235 ms >>> > 64 bytes from 192.168.7.2: icmp_req=2 ttl=64 time=0.125 ms >>> > 64 bytes from 192.168.7.2: icmp_req=3 ttl=64 time=0.157 ms >>> > 64 bytes from 192.168.7.2: icmp_req=4 ttl=64 time=0.117 ms >>> > ^C >>> > --- 192.168.7.2 ping statistics --- >>> > 4 packets transmitted, 4 received, 0% packet loss, time 1503ms >>> > rtt min/avg/max/mdev = 0.117/0.158/0.235/0.048 ms >>> > root@beaglebone:~# >>> > >>> > I can SSH into BBB & can ping to & fro with PC. But as shown on TOP, I >>> > can not ping to www.google.com >>> > >>> > Please help me >>> > >>> > Regards, >>> > Vinayak >>> > >>> > >>> > >>> > -- >>> > For more options, visit http://beagleboard.org/discuss >>> > --- >>> > You received this message because you are subscribed to the Google >>> > Groups "BeagleBoard" group. >>> > To unsubscribe from this group and stop receiving emails from it, send >>> > an email to beagleboard...@googlegroups.com. >>> > For more options, visit https://groups.google.com/groups/opt_out. >>> >>> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.