Ok, I did a cycle of the reset pin on the sensor board, and now it responds to i2cdetect -r 1 at address 0x60 :)
this is using pins 19 for CLK and 20 for DATA. with VDD at pin 5 (5V) thanks for the link. /Jacob 2013/10/31 Jacob Ole Juul Kolding <dac...@gmail.com> > I'm not sure if either my sensor isn't working or if it is something else. > > I've tried all combinations of 17,18 / 19,20 / 21,22 / 24,26 > and > i2cdetect -r 0 > i2cdetect -r 1 > i2cdetect -r 2 > > but nothing shows up at 0x60, the address of my sensor (MPL115A2) > http://www.adafruit.com/products/992#Tutorials > > /Jacob > > 2013/10/31 <smith.winston....@gmail.com> > > On Thursday, October 31, 2013 1:45:16 PM UTC-4, Dacobi wrote: >>> >>> But how do I translate this to pin numbers on P8 and P9? >>> >> >> Take a look at this thread/post, it should help: >> >> https://groups.google.com/d/msg/beagleboard/v9r8UkN7klk/h3rFKFJDLnUJ >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to beagleboard+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/groups/opt_out. >> > > > > -- > If you're not a socialist when you're young, it's because you have no > heart. > If you stop being a socialist when you get older, it's because you lack > intellect and imagination. > -- If you're not a socialist when you're young, it's because you have no heart. If you stop being a socialist when you get older, it's because you lack intellect and imagination. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.