Hi all,
I was reading the thread. I want to confirm this conclusion I have made: Is BBB with linux kernel version 3.8+ is still not available with power management options enabled??? Thank you On Monday, November 4, 2013 3:28:44 PM UTC+5, Ali wrote: > > Hi Abhijeet, > > I did the fix for wake up capable as per the TI thread you referred to and > recompiled a new kernel using the TI SDK 05.06.00.00. > But I am not sure which files (UImage, zImage, u-boot.img??......) I need > to download to the beagle bone black board to get suspend/resume via RTC > wake alarm working. > > > On Thursday, July 11, 2013 6:09:39 PM UTC+3, avd...@gmail.com wrote: >> >> Hi >> >> Please refer to my conversation on TI's blog: >> http://e2e.ti.com/support/arm/sitara_arm/f/791/p/274073/967686.aspx#967686 >> >> Hope you find it useful. >> >> Abhijeet >> >> On Wednesday, 12 June 2013 09:13:52 UTC-4, Mathijs van den Berg wrote: >>> >>> Dear developers, >>> >>> I would like to do some power management with the BeagleBone Black. >>> This board contains the AM3359 and is capable of getting into a deep >>> sleep consuming only 7mW or standby with 25mW. >>> >>> Documentation on the internet shows that this sleep mode can be >>> activated by executing '*echo mem* *>* */sys/power/state*'. >>> However, this gives an '*-sh: echo: write error: No such device*'. >>> >>> I found out that PM can be archieved with using an PM enabled kernel >>> together with a special binary file that runs on a Cortex M3 core inside >>> the AM3359. >>> My question is, if PM is enabled in the release eMMC latest image >>> (06-06-2013), and if not, what should be the correct/prefered way to >>> compile such kernel? >>> >>> Kind regards, >>> >>> Mathijs van den Berg >>> >>> >>> >>> >>> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
