Thanks Pyush This Works :) On Tuesday, April 30, 2013 3:42:04 AM UTC+5:30, Piyush Agarwal wrote: > > Hi Kenny, > > As Jason noted the installer is unsigned, this means you need to restart > Windows 8 in the mode where it allows you to install unsigned drivers. > > Here's a quick step-by-step guide: > > 1. Press win+c on the keyboard to bring up the charms side bar (or move > mouse to right top corner of the screen) > > 2. Click the Settings button. > > 3. Click the Change PC Settings at the bottom of the sidebar. > > 4. On screen that shows up, select the General option from the sidebar > then scroll down the page that appears. > > 5. Click the Restart now button under the Advanced startup section. > > 6. You will momentarily see the restarting screen, then it will switch to > a blue screen titled "Choose an option" > > 7. Click the Troubleshoot button. > > 8. Click Advanced options. > > 9. Click Startup Settings > > 10. Click Restart > > 11. You should then see a Startup Settings screen after your computer > reboots. > > 12. Press 7 or F7 on your keyboard to Disable driver signature enforcement > > 13. Now Windows 8 will continue starting up. > > 14. Log-in as normal, and then run BONE_D64.exe again > > 15. Now you should see 4 warning dialogs about "unsigned driver > installation", click OK for all of them. > > Then you should be good to go! > > > Hope that helps, > > Piyush > > On Sunday, April 28, 2013 11:05:53 AM UTC-4, Kenny Lindberg wrote: >> >> Trying to install software for my Beaglebone Black on Win8-64 and >> dpinst.exe fails. >> OSX seems to work, so I don't think it's a hardware issue. >> >> Is there a work around? >> >> Kenny >> >
-- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
