Here is the issue, If I plug in the mini HDMI plug and hook it up to a monitor the boot screen brifly comes up and then dies and the yellow PTC cap becomes VERY hot. I'm thinking there is a short somewhere in my board that is centered around the HDMI the cap. I've worked on circuit boards for years and something is obviously shorted
Thanks for your input much appreciated Bill On Monday, November 18, 2013 9:10:13 AM UTC-6, Gerald wrote: > > Can you be a little more specific as to which capacitor you are referring > to? Is this the yellow/orange PTC next to the USB A connector? > > Gerald > > > > On Mon, Nov 18, 2013 at 8:48 AM, Bill Dussault > <franki...@gmail.com<javascript:> > > wrote: > >> The Beaglebone large cap gets very hot when plugged into the 5v supply >> and the mini dvi-d plug is connected. Has anyone seen this behavior before? >> I'm a bit concerned. >> >> Thanks >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to beagleboard...@googlegroups.com <javascript:>. >> For more options, visit https://groups.google.com/groups/opt_out. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.