It turns out it was the image. I tried five different images. Wow, that was tougher than I thought. Thank you to all who helped. The image posted on this thread finally worked with the usb cable.
Thanks again Bill On Tuesday, November 19, 2013 9:29:18 PM UTC-6, Bill Dussault wrote: > > I have repeatedly tried flashing the BBB > with ubuntu-saucy-13.10-armhf-3.8.13-bone28.img. > I write the .img file to a micro scan disk card, place the card in the > slot and power the board on while holding the boot button down. The LED's > come on and I let go of the button. > The led's flash on and off for HOURS and then NOTHING happens it still has > angstrom loaded onto it. > > What the heck and I doing wrong!? this is very frustrating > > ANY help would be welcome this is annoying > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.