Experiencing same problem here!!!! After update my pc lost the connection with BBB, although LEDs are flashing (actually seem like joking with me :-) ). At least 3-4 persons got this problem and yet no fixing!!!
On Wednesday, November 20, 2013 3:11:38 PM UTC+11, mikez...@gmail.com wrote: > > I do not believe this is a Windows (or any other client) issue. > > I did essentially the same thing... update the packages on my board, > reboot, wammo. Like the op, I can still access the device over the network, > but I cannot access the device over USB any longer. When I ssh into the > device I don't see it binding on 192.168.7.2. When I do a dmesg on a client > PC I don't see any effect to plugging the USB cable in. > > I've tried power from the wall vs power from the ethernet, no difference. > I've tried Mac, Windows, Linux (CentOS 6.x) clients > > I do not believe it's the cable, or connector... It's unlikely that it was > damaged. > > To be clear, the device was working over USB just fine until I updated the > packages (using opkg). > > Please advise... > > Thank you. > Mike > > On Thursday, June 20, 2013 9:31:44 PM UTC-7, Richard Pesce wrote: >> >> Hello all! >> >> I recently received my Beaglebone Black. I followed the getting started >> guide HERE <http://beagleboard.org/Getting%20Started>, installed the >> drivers. Afterwards I was able to connect to http://192.168.7.2 and use >> cloud9 etc. >> >> I got to the "Update board with latest software" portion and downloaded >> BBB-eMMC-flasher-2013.06.06.img.xz<https://s3.amazonaws.com/angstrom/demo/beaglebone/BBB-eMMC-flasher-2013.06.06.img.xz> >> and >> flashed the eMMC successfully. I removed the power, ejected the uSD and >> then connected to the computer via USB and the BBB wouldn't mount as a USB >> drive. Fearing the update failed, I tried again with the same image. That >> failed... so I tried >> BBB-eMMC-flasher-2013.06.20.img.xz<https://s3.amazonaws.com/angstrom/demo/beaglebone/BBB-eMMC-flasher-2013.06.20.img.xz> >> from >> HERE<http://circuitco.com/support/index.php?title=Updating_The_Software> and >> flashed again... still no USB drive. I then tried >> BBB-eMMC-flasher-2013.06.17.img.xz<http://downloads.angstrom-distribution.org/demo/beaglebone/BBB-eMMC-flasher-2013.06.17.img.xz> >> from HERE <http://downloads.angstrom-distribution.org/demo/beaglebone/>... >> still no USB drive. In a last ditch effort I tried (Current Production >> Image) >> BBB-eMMC-flasher-2013.05.20.img.xz<https://s3.amazonaws.com/angstrom/demo/beaglebone/BBB-eMMC-flasher-2013.05.20.img.xz> >> from >> HERE<http://circuitco.com/support/index.php?title=Updating_The_Software>... >> still no USB drive. >> >> >> LINUX: >> It is important to note that I could SSH into all of these installs (not >> at http://192.168.7.2 though), and verified that everything worked.... >> I can see /dev/mmcblk0p1 is mounted at /media/BEAGLEBONE (with my most >> current flash) and all the files are present. >> >> WINDOWS: >> I searched in device manager and could not see the BBB at all or any >> unknown or not working hardware. And in computer management/Disk >> management there isn't anything present. >> >> I have attempted other computers (WIN7) and multiple USB ports.... same >> issue, >> >> >> Anyone have any suggestions? I'm sure I am missing something obvious. >> >> >> Thank you in advance! >> >> >> >> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
