Thanks for the response. I tried 192.168.7.2:5900?? I am using real VNC to connect and x11vnc on the host.
Is there a way to look at the BBB and figure out which ports it has open? Thanks Bill On Friday, November 22, 2013 12:29:40 PM UTC-6, Bill Dussault wrote: > > I am trying to set up VNC from a WIn7 PC into the BBB I am running ubuntu > on the BBB. > > on the terminal: > > > ubuntu@arm:~$ sudo apt-get install x11vnc vnc-java > > ubuntu@arm:~$ x11vnc -storepasswd (wrote my password) > > ubuntu@arm:~$ x11vnc -foreever -usepw > Password written to: /home/ubuntu/.vnc/passwd > 22/11/2013 18:22:19 x11vnc version: 0.9.13 lastmod: 2011-08-10 pid: 1926 > 22/11/2013 18:22:19 XOpenDisplay("") failed. > 22/11/2013 18:22:19 Trying again with XAUTHLOCALHOSTNAME=localhost ... > 22/11/2013 18:22:19 > 22/11/2013 18:22:19 *** XOpenDisplay failed. No -display or DISPLAY. > 22/11/2013 18:22:19 *** Trying ":0" in 4 seconds. Press Ctrl-C to abort. > 22/11/2013 18:22:19 *** 1 2 3 4 > 22/11/2013 18:22:23 XOpenDisplay(":0") failed. > 22/11/2013 18:22:23 Trying again with XAUTHLOCALHOSTNAME=localhost ... > 22/11/2013 18:22:23 XOpenDisplay(":0") failed. > 22/11/2013 18:22:23 Trying again with unset XAUTHLOCALHOSTNAME ... > 22/11/2013 18:22:23 > > 22/11/2013 18:22:23 *************************************** > 22/11/2013 18:22:23 *** XOpenDisplay failed (:0) > > *** x11vnc was unable to open the X DISPLAY: ":0", it cannot continue. > *** There may be "Xlib:" error messages above with details about the > failure. > > Some tips and guidelines: > > ** An X server (the one you wish to view) must be running before x11vnc is > started: x11vnc does not start the X server. (however, see the -create > option if that is what you really want). > > ** You must use -display <disp>, -OR- set and export your $DISPLAY > environment variable to refer to the display of the desired X server. > - Usually the display is simply ":0" (in fact x11vnc uses this if you > forget > to specify it), but in some multi-user situations it could be ":1", > ":2", > or even ":137". Ask your administrator or a guru if you are having > difficulty determining what your X DISPLAY is. > > ** Next, you need to have sufficient permissions (Xauthority) > to connect to the X DISPLAY. Here are some Tips: > > - Often, you just need to run x11vnc as the user logged into the X > session. > So make sure to be that user when you type x11vnc. > - Being root is usually not enough because the incorrect MIT-MAGIC-COOKIE > file may be accessed. The cookie file contains the secret key that > allows x11vnc to connect to the desired X DISPLAY. > - You can explicitly indicate which MIT-MAGIC-COOKIE file should be used > by the -auth option, e.g.: > x11vnc -auth /home/someuser/.Xauthority -display :0 > x11vnc -auth /tmp/.gdmzndVlR -display :0 > you must have read permission for the auth file. > See also '-auth guess' and '-findauth' discussed below. > > ** If NO ONE is logged into an X session yet, but there is a greeter login > program like "gdm", "kdm", "xdm", or "dtlogin" running, you will need > to find and use the raw display manager MIT-MAGIC-COOKIE file. > Some examples for various display managers: > > gdm: -auth /var/gdm/:0.Xauth > -auth /var/lib/gdm/:0.Xauth > kdm: -auth /var/lib/kdm/A:0-crWk72 > -auth /var/run/xauth/A:0-crWk72 > xdm: -auth /var/lib/xdm/authdir/authfiles/A:0-XQvaJk > dtlogin: -auth /var/dt/A:0-UgaaXa > > Sometimes the command "ps wwwwaux | grep auth" can reveal the file > location. > > Starting with x11vnc 0.9.9 you can have it try to guess by using: > > -auth guess > > (see also the x11vnc -findauth option.) > > Only root will have read permission for the file, and so x11vnc must be > run > as root (or copy it). The random characters in the filenames will of > course > change and the directory the cookie file resides in is system dependent. > > > On the Windows PC I installed RealVNC and open it to 192.168.7.2 and it > keeps giving me "Connection Refused 10061" > > Cannot find a good solution online. > > Any help would be appreciated > > Bill > > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.