Refer to my answer that I posted to on that other site. Gerald
On Mon, Nov 25, 2013 at 4:26 PM, Shiwei <shiwei.l...@gmail.com> wrote: > Hi Pro, > > I am Beaglebone fan and I am trying to clone a board from *Beaglebone* > *white*(A6A). I have some questions need your help: > 1). From schematic, CAT24C256W (U7) is to store variable & mac memory, do > I need to write codes to this EEPROM in u-boot? Can I just download > u-boot.img from Beaglebone white from bealgebone.org? > 2). From schematic, FT2232LQFN64(U12) AND USB2412_QFN28(U11) are used to > connect USB0, JTAG and UART0 to PC. My thought is: connect UART0 directly > to COM port on Computer, use USB0 as a seperate USB Port, delete JTAG port. > Is this design all right if I just want to boot into Linux? > > Thank you very much. > Sway > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
