The pins are numbered. Pin1 has a 1 next to it, closest to the connector and next to the inductor.
Gerald On Tue, Nov 26, 2013 at 3:36 AM, Martin H. <mart...@innomar.com> wrote: > Hi, > > I have got a BeagleBoard_Black Rev 6. > To solder that JTAG socket I am looking for an information where pin1 is > located on the board. > According to the schedule and the fact that pin5 should have a voltage of > 3.3V I would assume that pin1 is the pin close to pin12 of header P9. > > Can anybody confirm? > > Thanks! > > Martin > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
