Hello all. I'm having this problem and I've been banging my head against the wall for some time now. I'm running 64bit ubuntu 13.10 inside virtualbox vm. I've set up the NFS server and from what I can tell it's configured properly because I'm able to mount it from another computer (laptop running ubuntu 12.04). I'm exporting /home/miro/export where I have a rootfs folder and a symbolic link to the kerel image (uImage-BBB-3.8.13)
NFS server is on 192.168.1.250, statically assigned ip Beagle is on 192.168.1.115 assinged by DHCP. Beagleboard is running latest stock software. I can ping server from beagle, but I'm not able to get past *tftp 0x80200000 uImage-BBB-3.8.13* All devices are plugged into the same router. Also, I'm unsure about some of the env variables, such as rootpath. If anyone could shed some light on this I would greatly appreciate it. U-Boot# tftp 0x80200000 uImage-BBB-3.8.13 link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.250; our IP address is 192.168.1.115 Filename 'uImage-BBB-3.8.13'. Load address: 0x80200000 *Loading: T T T T T T T T T T T T T T T T T T T TRetry count exceeded; starting again*using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC 90:59:af:5d:07:b0 HOST MAC de:ad:be:af:00:00 RNDIS ready ERROR: The remote end did not respond in time. at ether.c:2395/usb_eth_init() link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.250; our IP address is 192.168.1.115 Filename 'uImage-BBB-3.8.13'. Load address: 0x80200000 Loading: T T T T T T T T T T T T T T T T T T T T Retry count exceeded; starting again using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC 90:59:af:5d:07:b0 HOST MAC de:ad:be:af:00:00 RNDIS ready ERROR: The remote end did not respond in time. at ether.c:2395/usb_eth_init() link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.250; our IP address is 192.168.1.115 Filename 'uImage-BBB-3.8.13'. Load address: 0x80200000 Loading: T T T T T T Abort U-Boot# printenv arch=arm autoload=no baudrate=115200 board=am335x board_name=A335BNLT board_rev=0A5C bootcmd=gpio set 53; i2c mw 0x24 1 0x3e; run findfdt; mmc dev 0; if mmc rescan ; then echo micro SD card found;setenv mmcdev 0;else echo No micro SD card found, setting mmcdev to 1;setenv mmcdev 1;fi;setenv bootpart ${mmcdev}:2;mmc dev ${mmcdev}; if mmc rescan; then gpio set 54; echo SD/MMC found on device ${mmcdev};if run loadbootenv; then echo Loaded environment from ${bootenv};run importbootenv;fi;if test -n $uenvcmd; then echo Running uenvcmd ...;run uenvcmd;fi;gpio set 55; if run loaduimage; then gpio set 56; run loadfdt;run mmcboot;fi;fi; bootdelay=1 bootdir=/boot bootenv=uEnv.txt bootfile=uImage-BBB-3.8.13 bootpart=0:2 console=ttyO0,115200n8 cpu=armv7 dfu_alt_info_emmc=rawemmc mmc 0 3751936 dfu_alt_info_mmc=boot part 0 1;rootfs part 0 2;MLO fat 0 1;MLO.raw mmc 100 100;u-boot.img.raw mmc 300 3C0;u-boot.img fat 0 1;uEnv.txt fat 0 1 dfu_alt_info_nand=SPL part 0 1;SPL.backup1 part 0 2;SPL.backup2 part 0 3;SPL.backup3 part 0 4;u-boot part 0 5;kernel part 0 7;rootfs part 0 8 dnsip=192.168.1.1 ethact=cpsw ethaddr=90:59:af:5d:07:b0 fdt_high=0xffffffff fdtaddr=0x80F80000 fdtfile=am335x-boneblack.dtb findfdt=if test $board_name = A33515BB; then setenv fdtfile am335x-evm.dtb; fi; if test $board_name = A335X_SK; then setenv fdtfile am335x-evmsk.dtb; fi;if test $board_name = A335BONE; then setenv fdtfile am335x-bone.dtb; fi; if test $board_name = A335BNLT; then setenv fdtfile am335x-boneblack.dtb; fi gatewayip=192.168.1.1 importbootenv=echo Importing environment from mmc ...; env import -t $loadaddr $filesize ipaddr=192.168.1.115 kloadaddr=0x80007fc0 loadaddr=0x80200000 loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv} loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile} loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz loaduimage=load mmc ${bootpart} ${kloadaddr} ${bootdir}/${bootfile} mmcargs=setenv bootargs console=${console} ${optargs} root=${mmcroot} rootfstype=${mmcrootfstype} mmcboot=echo Booting from mmc ...; run mmcargs; bootm ${kloadaddr} - ${fdtaddr} mmcdev=0 mmcroot=/dev/mmcblk0p2 ro mmcrootfstype=ext4 rootwait mtdids=nand0=omap2-nand.0 mtdparts=mtdparts=omap2-nand.0:128k(SPL),128k(SPL.backup1),128k(SPL.backup2),128k(SPL.backup3),1920k(u-boot),128k(u-boot-env),5m(kernel),-(rootfs) nandargs=setenv bootargs console=${console} ${optargs} root=${nandroot} rootfstype=${nandrootfstype} nandboot=echo Booting from nand ...; run nandargs; nand read ${loadaddr} ${nandsrcaddr} ${nandimgsize}; bootm ${loadaddr} nandimgsize=0x500000 nandroot=ubi0:rootfs rw ubi.mtd=7,2048 nandrootfstype=ubifs rootwait=1 nandsrcaddr=0x280000 netargs=setenv bootargs console=${console} ${optargs} root=/dev/nfs nfsroot=${serverip}:${rootpath},${nfsopts} rw ip=dhcp netboot=echo Booting from network ...; setenv autoload no; dhcp; tftp ${loadaddr} ${bootfile}; tftp ${fdtaddr} ${fdtfile}; run netargs; bootm ${loadaddr} - ${fdtaddr} netmask=255.255.255.0 nfsopts=nolock ramargs=setenv bootargs console=${console} ${optargs} root=${ramroot} rootfstype=${ramrootfstype} ramboot=echo Booting from ramdisk ...; run ramargs; bootm ${loadaddr} ${rdaddr} ${fdtaddr} ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=${rdaddr},64M ramrootfstype=ext2 rdaddr=0x81000000 rootpath=/home/miro/export serverip=192.168.1.250 soc=am33xx spiargs=setenv bootargs console=${console} ${optargs} root=${spiroot} rootfstype=${spirootfstype} spiboot=echo Booting from spi ...; run spiargs; sf probe ${spibusno}:0; sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; bootm ${loadaddr} spibusno=0 spiimgsize=0x362000 spiroot=/dev/mtdblock4 rw spirootfstype=jffs2 spisrcaddr=0xe0000 static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off stderr=serial stdin=serial stdout=serial usbnet_devaddr=90:59:af:5d:07:b0 vendor=ti ver=U-Boot 2013.04-dirty (Jun 19 2013 - 09:57:14) -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.