I posted some notes on that here: http://bonenotes.tumblr.com/ under *"Cross-compiling the BeagleBone 3.8 Kernel"*
On Thursday, January 2, 2014 12:15:50 AM UTC-5, Carl-Fredrik Sundström wrote: > > > > I want to get started in kernel development for the BBB and I can't find > where to start, I have done work before developing Linux drivers for > network interface cards and TV tuner cards. Is there a document that > describes how to setup a cross compilation environment for lets say an > ubuntu workstation or any other mainstream distribution and step by step > how to build a bin file for flashing ? > > I have looked at and can't find something like that > > http://www.openembedded.org/wiki/Main_Page > > http://www.angstrom-distribution.org > > According to thread linked below the BBB will be going towards debian, is > there a tutorial on how to cross compile debian ? > > > https://groups.google.com/forum/#!category-topic/beagleboard/beaglebone-black/WYrk-JUAkbM > > For me this is the number one stumbling block, I haven't tried compiling > just a kernel on the beagle itself, I assume thats not how you do it? > > > > > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.