https://sites.google.com/bbbhelper <----- 404
On Mon, Jan 6, 2014 at 2:03 PM, David Marquart <dmarqu...@gmail.com> wrote: > I looked at the tl-wn devices, but I am putting this in a Logic Supply > case and the dongle would stick out far enough that i worry about it > getting damaged. I am compiling 3.13 right now then going to try it again > with that to see how life is. > > My directions to myself are at > sites.google.com/site/bbbhelper<http://sites.google.com/bbbhelper>if you need > it. > > > > On Monday, January 6, 2014 2:54:18 PM UTC-6, KurtE wrote: >> >> It has been quite a few months since I looked at this as well. I >> remember back then (June?), that I did find some sources to build the >> driver for the 8192cu, which back then worked quite well. I think I still >> have the sources sitting on my PC, but it has been awhile since I figured >> out how to build and install it. >> >> I installed his Debian build, which I really like, but the edimax adapter >> has dropped a reasonable number of times now. So may try to see if I kept >> my notes for installing the patched driver, but in the mean time, I ordered >> one of the *tl-wn722n devices which hopefully will arrive tomorrow. >> *Sometimes >> it is easier to punt. >> >> On Monday, January 6, 2014 7:28:40 AM UTC-8, David Marquart wrote: >>> >>> building a driver from >>> >>> https://github.com/pvaret/rtl8192cu-fixes.git >>> for the little one from adafruit seems to be working quite well. ran since >>> thursday on 3.12.5 kernel without any issues that i could find so far. >>> >>> >>> On Thursday, December 26, 2013 3:37:50 PM UTC-6, David Marquart wrote: >>>> >>>> Does anyone have a recommendation for a wifi adapter that works with >>>> Robert Nelson's Ubuntu images? I have rtl8188cus and mt7601 and I can not >>>> get either to work. At this point I would rather just order one that works >>>> rather than waste more time trying to fight with either of these two. I >>>> have building the kernel working and have tried several times to build a >>>> new driver for both of these adapters but the mt7601 will not show up with >>>> iwconfig and the rtl8188cus will show up see my access point but will not >>>> connect to it. I am editing /etc/network/interfaces to try and get >>>> connected to our WEP "protected" network. I have no control over the type >>>> of encryption used. I was able to get everything working on Angstrom with >>>> connman so I know it is possible. >>>> >>>> Sorry if this became a little bit of a rant but I have spent a lot of >>>> time trying everything I could google up and now I just want to throw money >>>> at the problem. >>>> >>> -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
