From: Samer Shatta <samer.sha...@gmail.com> Reply-To: <beagleboard@googlegroups.com> Date: Tuesday, January 14, 2014 at 10:49 AM To: <beagleboard@googlegroups.com> Subject: Re: [beagleboard] Re: try to Build LCD7 cape
> ok > if i had no eeprom in my LCD cape design, and connect my lcd to the BBB and > open cap manager and echo the compiled device tree of my cap to the cape > manager manually . > does it work ?? > > i know that the eeprom function is only to tell the BBB when i connect my cape > to load the Overlay of my cape manager , > so if i load the overlay to the cape manager manually my cape should work with > out eeprom in cape design That is correct. You don¹t need the eeprom, but you will have to load the overlay manually. > > > On Tuesday, January 14, 2014 7:31:30 AM UTC-8, Samer Shatta wrote: >> i can't buy one from 4D Systems or CircuitCo cause the Export operation to my >> country is so hard and cost me a lot of money, so if there is another way to >> find the eeprom contents that will be a good solution for me . >> >> On Monday, January 13, 2014 11:56:34 PM UTC-8, Terry Storm wrote: >>> Most of the data in the EEPROM are not used by the BBB. There are only 2 >>> fields from what I read. >>> Would be easy to just buy yourself a 4DCAPE-70T from 4D Systems, or LCD7 >>> from CircuitCo, and read out the EEPROM yourself. Unless that defeats the >>> purpose and you want to build one without buying one. >>> >>> >>> On Tuesday, 14 January 2014 07:59:31 UTC+13, Samer Shatta wrote: >>>> Thanks for your replay >>>> i try to ask them but there is no response up to now >>>> >>>> On Monday, January 13, 2014 9:11:48 AM UTC-8, Gerald wrote: >>>>> My suggestion would be to ask 4DSystems. >>>>> >>>>> Gerald >>>>> >>>>> >>>>> On Mon, Jan 13, 2014 at 10:52 AM, Samer Shatta <samer....@gmail.com> >>>>> wrote: >>>>>> To make my question clear , where can i find the 4DSystem LCD7 cape >>>>>> eeprom (Header,EEPROM Revision,..,Pin Usage,....) >>>>>> is that file is private to the 4D System company ? >>>>>> >>>>>> Thanks in advance >>>>>> >>>>>> >>>>>> On Sunday, January 12, 2014 4:51:56 PM UTC-8, Samer Shatta wrote: >>>>>>> Hello >>>>>>> i try to build a LCD7 cape like this in the 4D systems >>>>>>> http://www.4dsystems.com.au/product/22/138/Beagle_Bone_LCD_Capes/4DCAPE_ >>>>>>> 70T/ >>>>>>> <http://www.4dsystems.com.au/product/22/138/Beagle_Bone_LCD_Capes/4DCAPE >>>>>>> _70T/> >>>>>>> >>>>>>> in the section of the eeprom >>>>>>> where can i find this lcd eeprom file decription (or .bin file) to write >>>>>>> it to my eeprom in my new cape ?? >>>>>>> Thanks >>>>>>> >>>>>> -- >>>>>> For more options, visit http://beagleboard.org/discuss >>>>>> --- >>>>>> You received this message because you are subscribed to the Google Groups >>>>>> "BeagleBoard" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, send an >>>>>> email to beagleboard...@googlegroups.com. >>>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>> > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/groups/opt_out. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
