OK, just to verify that: when I use these pins for something different and set an input signal to them only when SYS_RESETn is HIGH, everything is fine and the board will boot!?
On Wed, Jan 15, 2014 at 2:47 PM, Gerald Coley <ger...@beagleboard.org> wrote: > The tell the internal boot ROM where to find the code to load. It is > described in the System Reference Manual for the board. Being set wrong due > to interference with the boot pins, the board will never run. > > Gerald > > > > On Wed, Jan 15, 2014 at 4:33 AM, Satz Klauer <satzkla...@googlemail.com> > wrote: >> >> On Tue, Jan 14, 2014 at 3:49 PM, dl4mea <dl4...@yahoo.de> wrote: >> > Take care you don't change one of the SYSBOOT pin's value by your own >> > pullup/pulldown. >> >> Thats interesting...what are the SYSBOOT pins exactly? >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to beagleboard+unsubscr...@googlegroups.com. >> >> For more options, visit https://groups.google.com/groups/opt_out. > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/XxSRFwZgLg0/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/groups/opt_out. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
