Hello Will, I am experiencing the same problems !!
I am compiling a new kernel for ArchLinux with the proposed jitter-patch ... the lecacy-one (3.8.13) ... I will let you know if I am successfull !! Greetings, Alfred. Op zondag 12 januari 2014 13:35:38 UTC+1 schreef Will Kostelecky: > I have the same problem with the LCD7 on Archlinux and would really like > to get it fixed. I can't find the above file on my installation and am > not sure where to look. Or for that matter what to do with the patched > file if I were able to find it. Can someone help with a) telling me where > to look for the right file to patch, and b) tell me how to build a patched > driver? I am not a complete neophyte with Linux (I frequently build apps > from source and can debug build problems) but I dont know where to start > with drivers! > > Thanks, > Will > > On Thursday, 9 January 2014 07:58:47 UTC, Mickae1 wrote: >> >> Lan Kidd, For the patch, I'm sure that Robert Nelson will include it on >> the next release of the kernel, same for Koen ! >> >> Terry Storm, well not really :) , the noise come when you remove your >> finger, always at this time .... when the pressure is not enough we got >> some crazy x and y value .......... >> >> >> On Thu, Jan 9, 2014 at 6:54 AM, Terry Storm <terrys...@gmail.com> wrote: >> >>> Ditto. >>> >>> Regarding the fix which makes this work 99% of the time... >>> Have you considered the noise could be on the power lines which power >>> the touch screen? >>> One could assume the power rails are meant to be between GND and VCC, >>> however this may not be the case. It then assumes GND is 0 and VCC is Max. >>> Since there are 4 AIN's used, it should be possible to read the voltages... >>> Maybe do some sort of ratio calculation or something. >>> Just a thought. >>> >>> Terry >>> >>> >>> On Thursday, 9 January 2014 07:56:11 UTC+13, Ian Kidd wrote: >>>> >>>> I'm going to be the helpless little girl here and ask for a quick >>>> synopsis of how to apply the patch? I'm not sure where the file is that >>>> gets this Diff, because I can't locate it in /lib/modules. >>>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to beagleboard...@googlegroups.com. >>> For more options, visit https://groups.google.com/groups/opt_out. >>> >> >> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.