They are not supposed to be shiny. Solder is only shiny on the surface if nothing is soldered to it.
You can try soldering it back down, but check the pads first. If the pads on the connections are ripped then you have a big issue. Gerald On Thu, Feb 6, 2014 at 3:02 AM, <t...@tonydicola.com> wrote: > I was just trying to install Ubuntu from a microSD card on my recently > acquired BBB and unfortunately as I inserted the card the entire card > reader snapped off the board on its left side. The solder joints don't > look so great (they aren't very shiny at least) and it doesn't look like it > was attached very well. Anyone else run into similar problems? Can I try > touching the solder joints up to get it reattached or am I SOL? > > -Tony > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
