From: <wright...@gmail.com> Reply-To: <beagleboard@googlegroups.com> Date: Thursday, February 6, 2014 at 5:14 PM To: <beagleboard@googlegroups.com> Subject: [beagleboard] BBB With Dell E2014T Multitouch Display
> I'm running Angstrom with the stock 3.8.11 kernel. > > I have a Dell E2014T connected via HDMI and USB to the BBB, and I want to try > to get multitouch working. lsusb shows a Quanta device that disappears when I > unplug the USB cable from the monitor. I¹ve been looking at using this display, but from my research, there is not Linux driver for the multitouch sensor. You may want to contact Dell support and see if they have a Linux driver. I¹d love to see this working. Regards, John > > Bus 001 Device 009: ID 0408:3025 Quanta Computer, Inc. > > lsmod shows hidp, but no other hid modules. What I'm thinking is that I need > to use the hid-multitouch driver, but it's not included by default and is not > in Angstrom's repo (that I've found). So, I have 2 questions. > > 1. Am I on the right track with the hid-multitouch driver module? > 2. If so, is it in the repo somewhere or will I need to compile it? > > Thanks, > > Jeremy > > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/groups/opt_out. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
