I cannot reflash the eMMc. This particular BBBB (BBB brick) does not even boot from a SD card, although another BBB boots perfectly from the same SD card.
On Thursday, February 6, 2014 4:36:36 PM UTC+1, Gerald wrote: > > Signals look fine. Memory cannot be bricked if you follow the instructions > for reflashing the eMMC.. > > http://www.elinux.org/Beagleboard:Updating_The_Software > > > Gerald > > > On Thu, Feb 6, 2014 at 8:36 AM, Kees k <keeskwe...@gmail.com <javascript:> > > wrote: > >> Hello all, >> >> Right now I have a beaglebone black (A6), which has been used for 1-2 >> weeks. Unfortunately, it stopped booting this week. Some days ago it did >> not boot, but after resupplying power it it did. Now the BBB does not boot >> at all. >> -USR0-USR3 never lit >> -PWR LED lits >> -LDO pin 3 (out) = 3.3V >> -PMIC_PWR_EN = 1.8V >> -PGOOD = 1.8V >> -Serial debug port shows nothing >> >> Does anyone have hints on which signals to measure? Or is the processor / >> memory bricked? >> >> Best, >> >> Kees >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to beagleboard...@googlegroups.com <javascript:>. >> For more options, visit https://groups.google.com/groups/opt_out. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.